Part number definition
GY——Communication room (field) outdoor optical cable
T ——filled structure
A ——Aluminum-polyethylene bonded sheath
| GY | Communication room (field) outdoor optical cable | none | no reinforcement | B | Flat shape | A | Aluminum-polyethylene bonded sheath | 5 | Corrugated steel belt | Codename | Coating or jacket code | A1a | IEC and GB/T | G.651 | ||||||
| GH | Submarine Optical Cable for Communication | F | Non-metallic reinforcement | C | Self-supporting structure | G | Steel sheath | 44 | Double thick round steel wire | 1 | Fiber cover | A1b | IEC and GB/T | G.651 | ||||||
| GJ | Optical cable in communication room (office) | G | Metal heavy reinforcement | D | Fiber ribbon structure | L | Aluminum sheath | 4 | Single thick round steel wire | 2 | Polyethylene protection tube | A1c | IEC and GB/T | G.651 | ||||||
| GR | Flexible Optical Cable for Communication | H | Non-metallic heavy-duty reinforcement | E | Oval shape | Q | Lead sheath | 33 | Double thin round steel wire | 3 | Polyethylene sleeve | A1d | IEC and GB/T | G.651 | ||||||
| GS | Optical fiber cable in communication equipment | G | Skeleton trough structure | S | Steel-polyethylene bonded magnetic protection | 3 | Single thin round steel wire | 4 | Polyethylene sleeve and nylon sleeve | B1.1 (B1) | Non-dispersion shifted fiber | G652 | ||||||||
| GT | Special optical cable for communication | J | Fiber tight sleeve coating structure | U | Polyurethane sheath | 2 | Double steel belt | 5 | PVC sleeve | B1.2 | Cut-off wavelength shifted fiber | G654 | ||||||||
| GW | Metal-free optical cable for communication | R | Inflatable structure | V | PVC sheath | 0 | No armor layer | B1.3 | IEC and GB/T | G.652C | ||||||||||
| GM | Mobile optical cable for communication | T | Grease filled structure | W | Steel-polyethylene bonded sheath with parallel steel wires | B2 | Dispersion shift type optical cable | G653 | ||||||||||||
| X | Cable bundle tube (coating) structure | Y | Polyethylene sheath | B4 | Non-zero dispersion shifted fiber | G655 | ||||||||||||||
| Z | Flame retardant |
Product description
GYTA (metal strengthening member, loose tube stranded and filled, aluminum-polyethylene bonded sheathed outdoor optical fiber cable for communication) The structure of the optical cable is to sheath single-mode or multi-mode optical fiber into the inner filling made of high modulus plastic Waterproof compound in loose tube. The center of the cable core is a metal reinforced core. For some fiber optic cables, the metal reinforced core is also extruded with a layer of polyethylene (PE). The loose tube (and filling rope) is twisted around the central reinforcing core to form a compact and circular cable core, and the gaps in the cable core are filled with water blocking compounds. The aluminum-plastic composite tape is longitudinally wrapped and then extruded with a polyethylene sheath.
Features
●Precise control of the excess length of the optical fiber ensures that the optical cable has good tensile performance and temperature characteristics
●PBT loose tube material has good hydrolysis resistance, and the tube is filled with special grease to protect the optical fiber
●PE sheath has good resistance to solar radiation
●Smooth outer sheath enables the optical cable to have a smaller coefficient of friction during installation
●The following measures are taken to ensure the waterproof performance of the optical cable: special waterproof compound is filled in the loose tube; completely filled with the cable core; aluminum-plastic composite with moisture-proof layer
●The side pressure index of aluminum belt is not as good as that of steel belt, but the moisture-proof and rust-proof effect is better than that of steel belt. GYTA has a long life when used in pipes.
Applicable laying
● Aerial laying
● Wear tube/blowing in tube
Structure
 |
 |
Technical parameter
| G.652 | G.655 | 50/125 pm | 62.5/125 pm | ||
| Attenuation(+20 C) | @ 850 nm | < 3.0 dB/km | < 3.3 dB/km | ||
| @ 1300 nm | < 1.0 dB/km | < 1.0 dB/km | |||
| @1310 nm | < 0.36 dB/km | < 0.40 dB/km | |||
| @ 1550 nm | < 0.22 dB/km | < 0.23 dB/km | |||
| Bandwidth(Class A) | @ 850 nm | > 500 MHz-km | > 200 MHz-km | ||
| @ 1300 nm | > 1000 MHz-km | > 600 MHz-km | |||
| Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
| Cable Cut-off Wavelength 入cc | < 1260 nm | < 1450 nm | |||
|
Cable Type(Increased by 2 bers) |
Fiber Count |
Tubes |
Fillers |
Cable Diameter (mm) |
Cable Weight (kg/km) |
Tensile Strength: Long/Short term (N) |
Crush Resistance: Long/Short term (N/100mm) |
Bending Radius Static/Dynamic (mm) |
| GYTA-2-6 |
2~6 |
1 |
4 |
9.2 |
80 |
600/1500 |
300/1000 |
10D/20D |
| GYTA-8-12 |
8~12 |
2 |
3 |
9.2 |
80 |
600/1500 |
300/1000 |
10D/20D |
| GYTA-14-18 | 14-18 |
3 |
2 |
9.2 |
80 |
600/1500 |
300/1000 |
10D/20D |
| GYTA-20-24 | 20-24 |
4 |
1 |
9.2 |
80 |
600/1500 |
300/1000 |
10D/20D |
| GYTA-26-30 | 26 〜30 |
5 |
0 |
9.2 |
80 |
600/1500 |
300/1000 |
10D/20D |
| GYTA-32-36 | 32 〜36 |
6 |
0 |
9.7 |
97 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-38-48 | 38-48 |
4 |
1 |
10.5 |
109 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-50-60 | 50-60 |
5 |
0 |
10.5 |
109 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-62-72 | 62-72 |
6 |
0 |
11.5 |
126 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-74-84 | 74-84 |
7 |
1 |
13.2 |
153 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-86-96 | 86-96 |
8 |
0 |
13.2 |
153 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-98-108 |
98-108 |
9 |
1 |
14.6 |
182 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-110-120 | 110-120 |
10 |
0 |
14.6 |
182 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-122-132 | 122-132 | 11 |
1 |
16.5 |
221 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-134 〜144 | 134-144 |
12 |
0 |
16.5 |
221 |
1000/3000 |
300/1000 |
10D/20D |
| GYTA-146-288 | 146-288 |
16.5 |
222 |
1000/3000 |
300/1000 |
10D/20D |
||
Post time: Feb-09-2021