1Ge 1Fe LAN xPON ONU WiFi CATV RF with POTS Tel RJ11 Featured Image

》

《

1Ge 1Fe LAN xPON ONU WiFi CATV RF with POTS Tel RJ11

QF-CX101WCP is an optic network unit for xPON protocol, it can work in both GPON and EPON networks. when this device well connected, the system will auto-recognize the operating GPON or EPON. 1Ge 1Fe LAN with xPON(for both GPON and EPON networks), 1 single mode CATV port is good performance for RF channel televison, 1 POTS for telephone rj11.

Model Name: QF-CX101WCP Model Series No. CX1112R002 This xPON ONU is a cost-effective type, which could work with many GPON OLT and EPON OLT, such as Huawei, ZTE, Fiberhome, Alcatel, Nokia.

Color:

Send email to us Add To Cart

Product Detail

Overview

1G1F+WIFI

l 1G1F+WIFI+CATV+POTS is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier- class FTTH application provides data service access.

l 1G1F+WIFI+CATV+POTS is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.

l 1G1F+WIFI+CATV+POTS adopts high reliability, easy management, configuration flexibility and good

quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.

l 1G1F+WIFI+CATV+POTS is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up

to 300Mbps.

l 1G1F+WIFI+CATV+POTS is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

l 1G1F+WIFI+CATV+POTS is designed by Realtek chipset 9602C.

Feature

l Supports Dual Mode (can access GPON/EPON OLT).

l Supports SFU and HGU of EPON CTC 3.0 standard

l Supports GPON G.984/G.988 standards and IEEE802.3ah.

l Support CATV interface for Video Service and remote control by Major OLT

l Support SIP Proctol for Voip Service

l Integrated line testing compliant with GR-909 on POTS

l Support 802.11n WIFI (2×2 MIMO) function

l Support NAT, Firewall function.

l Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect

l Support port mode of VLAN configuration

l Support LAN IP and DHCP Server configuration

l Support TR069 Remote Configuration and maintenance

l Support Route PPPoE/DHCP/Static IP and Bridge mixed mode

l Support IPv4/IPv6 dual stack

l Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy

l Compatible with popular OLT(HW, ZTE, FiberHome…)

Specification

Technical Item	Details
PON interface	1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connectorReceiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBmTransmission distance: 20KM
LAN interface	1×10/100/1000Mbps and 1×10/100Mbps auto adaptive Ethernetinterfaces. Full/Half, RJ45 connector
WIFI Interface	Compliant with IEEE802.11b/g/nOperating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBiSupport: Multiple SSID Channel:13Modulation type: DSSS、CCK and OFDMEncoding scheme: BPSK、QPSK、16QAM and 64QAM
CATV Interface	RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input）AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm)
LED	9 LED, For Status of WIFI 、WPS、PWR、LOS、PON、LAN1~LAN2、WORN、
Push-Button	4, for Function of Power on/off, Reset, WPS, WIFI
Operating condition	Temperature : 0℃～+50℃Humidity :10%～90%（non-condensing）
Storing Condition	Temperature : -40℃～+60℃Humidity :10%～90%（non-condensing）
Power supply	DC 12V/1A
Power Consumption	<6W
Net Weight	<0.3kg

Panel lights and Introduction

Pilot Lamp	Status	Description
WIFI	On	The WIFI interface is up.
	Blink	The WIFI interface is sending or/and receiving data (ACT).
	Off	The WIFI interface is down.
WPS	Blink	The WIFI interface is securely establishing a connection.
WPS	Off	The WIFI interface does not establish a secure connection.
PWR	On	The device is powered up.
PWR	Off	The device is powered down.
LOS	Blink	The device doses not receive optical signals or with low signals.
LOS	Off	The device has received optical signal.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LAN1~LAN2	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
Worn(CATV)	On	Input optical power is higher than 3dbm or lower than -15dbm
Worn(CATV)	Off	Input optical power is between -15dbm and 3dbm
Normal (CATV)	On	Input optical power is between -15dbm and 3dbm
Normal (CATV)	Off	Input optical power is higher than 3dbm or lower than -15dbm

FXS	On	Telephone has registered to the SIP Server.
	Blink	Telephone has registered and data transmission (ACT).
	Off	Telephone registration is incorrect.

Application

l Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)

l Typical Service：Broadband Internet access, IPV, VOD, video surveillance, etc.

Ordering information

Product Name	Product Model	Descriptions
1G1F+WIFI+CATV XPON	PN: QF-CX101WCP Series:CX1112R002	10/100/1000Mbps auto adaptive Ethernet（RJ45）,1SC/APC Connector, Plastic Casing, External power supply adapter
1G1F+WIFI+CATV EPON	PN: QF-CE101WCP Series:CE1112R002	10/100/1000Mbps auto adaptive Ethernet（RJ45）,1SC/APC Connector, Plastic Casing, External power supply adapter