Best-Selling How To Configure Epon Onu - QF-HX101WP 1GE+1FE WIFI+1POTS XPON ONU(Both GPON and EPON) – Qualfiber


Color:

Product Detail

Related Video

Feedback (2)

No matter new customer or previous client, We believe in prolonged time period and trustworthy relationship for Premade Fiber Optic Cable, Submarine Optical Fibre, Premade Fiber Optic Cable, We welcome you to inquire us by call or mail and hope to build a successful and cooperative relationship.
Best-Selling How To Configure Epon Onu - QF-HX101WP 1GE+1FE WIFI+1POTS XPON ONU(Both GPON and EPON) – Qualfiber Detail:

Description
1. Overview
  • 1G1F+WIFI series is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by Qualfiber, The carrier-class FTTH application provides data service access.
  • 1G1F+WIFI series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
  • 1G1F+WIFI series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
  • 1G1F+WIFI series is designed by Realtek chipset solution.

2. Functional Feature

  • Support EPON and GPON Mode, and switch mode automatically
  • Support ONU auto-discovery/Link detection/remote upgrade of software
  • WAN connections support Route and Bridge mode
  • Route mode supports PPPoE/DHCP/ static IP
  • Support WIFI Interface and multiple SSID
  • Support QoS and DBA
  • Support port Isolation and port VLAN configuration
  • Support Firewall function and IGMP snooping multicast feature
  • Support  LAN IP and DHCP Server configuration;
  • Support Port Forwarding and Loop-Detect
  • Support TR069 remote configuration and maintenance
  • Support POTS interface for VoIP Service
  • Specialized design for system breakdown prevention to  maintain a stable system

3. Hardware Specification

Technical item Details
PON Interface 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
Receiving sensitivity: ≤-27dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
Wavelength TX: 1310nm, RX: 1490nm
Optical Interface SC/APC Connector
LAN Interface 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless Compliant with IEEE802.11b/g/n,
Operating frequency: 2.400-2.4835GHz
support MIMO, rate up to 300Mbps,
2T2R,2 external antenna 5dBi,
Support: multiple SSID
Channel: Auto
Modulation type: DSSS, CCK and OFDM
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
LED Status of POWER、LOS、PON、SYS、LAN1、LAN2、WIFI、WPS、Internet
Push-Button 3,For Function of Reset、WLAN、WPS
Operating Condition Temperature: 0℃~+50
Humidity: 10%~90%(non-condensing
Storing Condition Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing
Power Supply DC 12V/1A
Power Consumption ≤6W
Dimension 155mm×92mm×34mm(L×W×H
Net Weight 0.24Kg

4. Panel lights Introduction

Pilot Lamp Status Description
PWR On The device is powered up.
Off The device is powered down.
PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LOS Blink The device does not receive optical signals.
Off The device has received optical signal.
SYS On The device system runs normally.
Off The device system runs abnormally.
INTERNET Blink The device network connection is normal.
Off The device network connection is abnormal.
WIFI On The WIFI interface is up.
Blink The WIFI interface is sending or/and receiving data (ACT).
Off The WIFI interface is down.
WPS Blink The WIFI interface is securely establishing a connection.
Off The WIFI interface does not establish a secure connection.
LAN1 On Port(LAN1) is connected properly (LINK).
Blink Port(LAN1) is sending or/and receiving data (ACT).
Off Port(LAN1) connection exception or not connected.
LAN2 On Port(LAN2) is connected properly (LINK).
Blink Port(LAN2) is sending or/and receiving data (ACT).
Off Port(LAN2) connection exception or not connected.

5. Application

  • Typical SolutionFTTO(Office) FTTB(Building)FTTH(Home)
  • Typical Application(optional)INTERNETIPTVVODVoIPIP Camera etc.


Figure: All function Optional Application Diagram

6. Ordering information

Product Name Product Model Descriptions
XPON ONU 1G1F+WIFI QF-HX101W 1×10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC/APC Connector , 2.4GHz WIFI, Plastic Casing, External power supply adapter

Contact us:
Qualfiber Technology Co., Ltd                                               
Email to us: sales@qualfiber.com
Website: https://www.qualfiber.com
Specifications are subject to change without notice.
Copyright © QUALFIBER TECHNOLOGY. All rights reserved.


Product detail pictures:


Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.

Our well-equipped facilities and exceptional good quality manage throughout all stages of production enables us to guarantee total shopper satisfaction for Best-Selling How To Configure Epon Onu - QF-HX101WP 1GE+1FE WIFI+1POTS XPON ONU(Both GPON and EPON) – Qualfiber, The product will supply to all over the world, such as: New Orleans, Ottawa, Bolivia, With well educated, innovative and energetic staff, we are responsible for all elements of research, design, manufacture, sale and distribution. By studying and developing new techniques, we are not only following but also leading fashion industry. We listen attentively to the feedback from our customers and provide instant replies. You will instantly feel our professional and attentive service.
Write your message here and send it to us
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
5 Stars By Jonathan from Panama - 2017.03.07 13:42
Timely delivery, strict implementation of the contract provisions of the goods, encountered special circumstances, but also actively cooperate, a trustworthy company!
5 Stars By Erica from Guyana - 2017.11.20 15:58