In FTTx and PON architectures, fiber optic splitter is an important component to share the optic network with multiple users. The basic principle of fiber optic splitter is to split one optic light beam into several parts at a certain ratio. According to different manufacture technologies, fiber...
1. Scope of application
This Installation Manual suits for the Fiber Optic Splice Closure (Hereafter abbreviated as FOSC), as the guidance of proper installation. The scope of application is: aerial, underground, pipeline, hand-holes. The ambient temperature ranges from -40 to 65℃.
2. Basic struc...
PLC splitter or planar lightwave circuit splitter is a passive component that has the special waveguide made of planar silica, quartz or other materials. It is employed to split a strand of optical signal into two or more strands. PLC splitter also has lots of split ratios, and the most common o...
As fiber optic link becomes more and more acceptable by average consumers, Passive Optical Network (PON) systems are more widely deployed in common homes. Fiber optic splitter is an indispensable passive optical device in PON systems. Optical splitters can be divided into Fused Biconical Taper (...
A GPON network is capable of transmitting ethernet, TDM (Time Division Multiplexing) as well as ATM traffic. A GPON network consists of OLT (Optical Line Terminals), ONU (Optical Network Unit), and a splitter. The splitter will divide the signal when needed. The OLT takes in all of the optical si...
Optical fiber termination by fusion splicing or mechanical splicing is very common now with the increasing development of fiber optic network. As optical fibers are sensitive to pulling, bending and crushing forces, fiber splice tray is used to provide a safe routing and easy-to-manage environme...
