Color:
Factory wholesale Wifi Network Repeaters - 4GE+2POTS 2.4G&5G WIFI+1USB GPON ONU – Qualfiber Detail:
Description
4GE+2POTS 2.4G&5G WIFI+1USB GPON ONU is one of the series Gigabit Passive Optical Network user terminals from Qualfiber Technology Co., Ltd Compliance with ITU-T G.984 GPON international standard, it’s good at inter-operation with most of all GPON OLT in the industry by support full OMCI. With cost-effective, easy deployment, stable software and strong function advantages, it’s especially suitable for FTTH (Fiber to the Home), and meet the requirements of the wideband access network.
Feature
- Support 4094 VLANs
- Support 2K MAC address table, support MAC address limitation
- Support port speed limitation, storm control, isolation and loop detection
- Support Dying Gasp
- Support IGMP Snooping, Support CTC controllable multicast
- Support 4 priority queues scheduling with SP algorithms
- WAN connection support route mode and bridge mode
- WAN connection support PPPoE, dynamic IP and static IP configuration at route mode
- Support OMCI, CLI and WEB configuration management
- Support remote upgrade with OLT and local upgrade in WEB
Specification
| Hardware Specification | |
| Upstream | 1 GPON interface, SC single-mode/single-fiber |
| Wavelength | Tx 1310nm, Rx 1490nm |
| Optical interface | SC/PC connector |
| Downstream | 4x 10/100/1000Mbps auto-adaptive Ethernet interfaces, Full Duplex/Half Duplex, RJ45 connectors 2 VOIP interface, support 4REN per pots, RJ11 connectors 2.4G WiFi interface, support 802.11b/g/n, 2T2R 5G WiFi interface, support 802.11ac, 2T2R 1 USB2.0 interface, support 500mA device |
| LED indicators | 13 indicators, for the status of power, PON port, FXS, WLAN, USB and Ethernet ports. |
| DC power supply | +12V, external AC-DC power adaptor |
| Power switch | 1 Power On/Off |
| Power consumption | ≤18W |
| Operating condition | Operating temp: -5 – +55℃, operating humidity:10-90%(non-condensed) |
| Storing condition | Storing temp: -30 – +60℃, storing humidity:10-90%(non-condensed) |
| Dimension | 176mm（Length）* 145mm（Width）* 37mm（Height） |
| Net weight | <0.8kg |
| Software Function | |
| PON port | Compliance with ITU-T G.984.x, and CTC standards |
| Support 4 priority queues scheduling with SP algorithms | |
| Support Dying gasp | |
| Ethernet ports | Support MDI/MDIX |
| Support ingress/egress rate limitation | |
| Support isolation | |
| WLAN | Support AP mode |
| Support 802.11b/g/n/ 802.11ac | |
| Support multiple SSIDs | |
| Support WPA/WPA2, WPA-PSK/WPA2-PSK | |
| Support ch.1-11 ch.36-149 auto channel | |
| WAN | Support 4094 VLAN |
| Support Bridge/Router Mode | |
| Support DHCP/PPPOE/Static IP | |
| Support Service including Internet, VOIP, IPTV and TR069 | |
| MAC Learning | Support 2K MAC address |
| Support MAC limitation | |
| Support static MAC address | |
| Configurable aging time | |
| STP | Support IEEE 802.1d (STP) |
| Multicast | Support IGMP Snooping |
| Support 255 multicast entry | |
| Support IGMP v1/v2 | |
| Support CTC controllable Snooping | |
| QoS | Support 802.1p priority queue scheduling |
| Support SP scheduling algorithms | |
| ACL | Rule according to destination IP, source IP, destination MAC, source MAC, destination protocol port number, source protocol port number, SVLAN, Ethernet type, IP priority, IP packet protocol type, etc |
| Packet filtering according to the above rules | |
| Flow Control | Support IEEE 802.3x duplex flow control |
| Support port rate limitation | |
| Mirroring | Support port mirroring for LAN interfaces, PON ports, and CPU |
| Maintenance | Support configuration saving, and restore to the factory configuration |
| Support local upgrading through telnet and web | |
| Support remote upgrading from OLT | |
| USB | Support USB1.0 USB2.0 |
| Support USB Host | |
| Support Auto Mount | |
| VOIP | Support SIP |
| Support DTMF | |
| Support Echo canceller | |
| Support G.711 a/u law, G.729, G.722 | |
| Support VAD,CNG | |
| Support T.30, T.38 | |
| Management | Support local or remote CLI configuration |
| Support web configuration | |
| Support OMCI | |
5. Application
- Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
- Typical Business：INTERNET、IPTV、VOD、IP Camera、CATV etc.
Figure: 1G3F+WIFI+CATV+POTS Application Diagram
Ordering information
| Product Name | Product Model | Descriptions |
| QF-TWCG541 | 4GE+WIFI+2POTS | 4×10/100/1000Mbps Ethernet, 1 SC/APC Connector, 2x RJ11 POTS 2.4G&5GHz WIFI, Plastic Casing, External power supply adapter |
Contact us
Qualfiber Technology Co.,Ltd
Email to us: sales@qualfiber.com
Website: https://www.qualfiber.com
Specifications are subject to change without notice.
Copyright © QUALFIBER TECHNOLOGY. All rights reserved.
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
We now have several exceptional workers customers good at marketing, QC, and working with types of troublesome trouble during the creation system for Factory wholesale Wifi Network Repeaters - 4GE+2POTS 2.4G&5G WIFI+1USB GPON ONU – Qualfiber, The product will supply to all over the world, such as: Morocco, Latvia, Rome, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
Write your message here and send it to us
By Ruth from UAE - 2017.09.22 11:32
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Astrid from Houston - 2018.12.22 12:52
