Color:
High definition Wifi 6 Extender - 1Ge 1Fe LAN xPON ONU WiFi CATV RF with POTS Tel RJ11 – Qualfiber Detail:
Overview
1G1F+WIFI
l 1G1F+WIFI+CATV+POTS is designed as HGU (Home Gateway Unit) in deferent FTTH solutions; the carrier- class FTTH application provides data service access.
l 1G1F+WIFI+CATV+POTS is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
l 1G1F+WIFI+CATV+POTS adopts high reliability, easy management, configuration flexibility and good
quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.
l 1G1F+WIFI+CATV+POTS is compliant with IEEE802.11n STD, adopts with 2×2 MIMO, the highest rate up
to 300Mbps.
l 1G1F+WIFI+CATV+POTS is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
l 1G1F+WIFI+CATV+POTS is designed by Realtek chipset 9602C.
Feature
l Supports Dual Mode (can access GPON/EPON OLT).
l Supports SFU and HGU of EPON CTC 3.0 standard
l Supports GPON G.984/G.988 standards and IEEE802.3ah.
l Support CATV interface for Video Service and remote control by Major OLT
l Support SIP Proctol for Voip Service
l Integrated line testing compliant with GR-909 on POTS
l Support 802.11n WIFI (2×2 MIMO) function
l Support NAT, Firewall function.
l Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
l Support port mode of VLAN configuration
l Support LAN IP and DHCP Server configuration
l Support TR069 Remote Configuration and maintenance
l Support Route PPPoE/DHCP/Static IP and Bridge mixed mode
l Support IPv4/IPv6 dual stack
l Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy
l Compatible with popular OLT(HW, ZTE, FiberHome…)
Specification
| Technical Item | Details |
| PON interface | 1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connectorReceiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBmTransmission distance: 20KM |
| LAN interface | 1×10/100/1000Mbps and 1×10/100Mbps auto adaptive Ethernetinterfaces. Full/Half, RJ45 connector |
| WIFI Interface | Compliant with IEEE802.11b/g/nOperating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBiSupport: Multiple SSID Channel:13Modulation type: DSSS、CCK and OFDMEncoding scheme: BPSK、QPSK、16QAM and 64QAM |
| CATV Interface | RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input）AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm
MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED | 9 LED, For Status of WIFI 、WPS、PWR、LOS、PON、LAN1~LAN2、WORN、 |
| Push-Button | 4, for Function of Power on/off, Reset, WPS, WIFI |
| Operating condition | Temperature : 0℃～+50℃Humidity :10%～90%（non-condensing） |
| Storing Condition | Temperature : -40℃～+60℃Humidity :10%～90%（non-condensing） |
| Power supply | DC 12V/1A |
| Power Consumption | <6W |
| Net Weight | <0.3kg |
Panel lights and Introduction
| Pilot Lamp | Status | Description |
| WIFI | On | The WIFI interface is up. |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| Off | The WIFI interface is down. | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| Worn(CATV) | On | Input optical power is higher than 3dbm or lower than -15dbm |
| Off | Input optical power is between -15dbm and 3dbm | |
| Normal (CATV) | On | Input optical power is between -15dbm and 3dbm |
| Off | Input optical power is higher than 3dbm or lower than -15dbm |
| FXS | On | Telephone has registered to the SIP Server. |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. |
Application
l Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
l Typical Service：Broadband Internet access, IPV, VOD, video surveillance, etc.
Ordering information
| Product Name |
Product Model |
Descriptions |
| 1G1F+WIFI+CATV XPON | PN: QF-CX101WCP
Series:CX1112R002 |
10/100/1000Mbps auto adaptive Ethernet（RJ45）,1SC/APC Connector, Plastic Casing, External power supply adapter |
| 1G1F+WIFI+CATV EPON | PN: QF-CE101WCP
Series:CE1112R002 |
10/100/1000Mbps auto adaptive Ethernet（RJ45）,1SC/APC Connector, Plastic Casing, External power supply adapter |
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
We often stay with the principle "Quality Very first, Prestige Supreme". We have been fully committed to supplying our consumers with competitively priced high-quality goods, prompt delivery and skilled provider for High definition Wifi 6 Extender - 1Ge 1Fe LAN xPON ONU WiFi CATV RF with POTS Tel RJ11 – Qualfiber, The product will supply to all over the world, such as: London, Mali, Germany, We guarantee that our company will try our best to reduce customer purchase cost , shorten the period of purchase , stable products quality , increase customers' satisfaction and achieve win-win situation .
By Stephen from Cambodia - 2018.12.11 11:26
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Sara from Boston - 2018.02.21 12:14
