Color:
Manufacturer of 802.11 Ax Wifi - QF-HE103WCP 1GE+3FE+CATV+POTS WIFI EPON – Qualfiber Detail:
1. Overview
l 1G3F+WIFI+CATV+POTS series is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by Qualfiber. The carrier-class FTTH application provides data service access.
l 1G3F+WIFI+CATV+POTS series is based on mature and stable, cost-effective EPON technology. It can switch automatically with EPON when it access to the EPON OLT.
l 1G3F+WIFI+CATV+POTS series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of Telecom EPON CTC3,0 .
l 1G3F+WIFI+CATV+POTS series is designed by Realtek chipset 9603C
2. Functional Feature
l Support EPON, and switch mode automatically
l Support ONU auto-discovery/Link detection/remote upgrade of software
l WAN connections support Route and Bridge mode
l Route mode supports PPPoE/DHCP/ static IP
l Support WIFI Interface and multiple SSID
l Support QoS and DBA
l Support port Isolation and port VLAN configuration
l Support Firewall function and IGMP snooping multicast feature
l Support LAN IP and DHCP Server configuration;
l Support Port Forwarding and Loop-Detect
l Support TR069 remote configuration and maintenance
l Support CATV interface for IPTV, remotely control by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
l Support POTS interface for VoIP Service
l Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Technical item | Details |
PON Interface | 1 EPON port (EPON PX20) |
Receiving sensitivity: ≤-27dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | Tx: 1310nm, Rx: 1490nm |
Optical Interface | SC/APC Connector or customized |
LAN Interface | 1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
CATV Interface | RF, optical power : +2~-18dBm |
Optical reflection loss: ≥45dB | |
Optical receiving wavelength: 1550±10nm | |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
RF output level: 78dBuV | |
AGC range: 0~-15dBm | |
MER: ≥32dB@-15dBm | |
POTS interface | 1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909 |
Wireless | Compliant with IEEE802.11b/g/n,
Operating frequency: 1.4888GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: Multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAM |
LED | Status of POWER, LOS, PON, SYS, LAN1~LAN4 ,WIFI, WPS, Internet, FXS(POTS/TEL), Worn, Normal(CATV) |
Push-Button | 3,For Function of Reset, WLAN, WPS |
Operating Condition | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | Temperature: -30℃~+60℃ |
Humidity: 10%~90%(non-condensing) | |
Power Supply | DC 12V/1A |
Power Consumption | ≤6W |
Dimension | 155mm×92mm×34mm(L×W×H) |
Net Weight | 0.24Kg |
4. Panel lights Introduction
Pilot Lamp |
Status |
Description |
PWR |
On |
The device is powered up. |
Off |
The device is powered down. | |
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. | |
Off |
The device registration is incorrect. | |
LOS |
Blink |
The device doses not receive optical signals. |
Off |
The device has received optical signal. | |
SYS |
On |
The device system runs normally. |
Off |
The device system runs abnormally. | |
INTERNET |
Blink |
The device network connection is normal. |
Off |
The device network connection is abnormal. | |
WIFI |
On |
The WIFI interface is up. |
Blink |
The WIFI interface is sending or/and receiving data (ACT). | |
Off |
The WIFI interface is down. | |
FXS |
On |
Phone has registered to the SIP Server. |
Blink |
Phone has registered and data transmission (ACT). | |
Off |
Phone registration is incorrect. | |
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
Off |
The WIFI interface does not establish a secure connection. | |
LAN1~LAN4 |
On |
Port (LANx) is connected properly (LINK). |
Blink |
Port (LANx) is sending or/and receiving data (ACT). | |
Off |
Port (LANx) connection exception or not connected. | |
Worn (CATV) |
On |
Input optical power is higher than 3dbm or lower than -13dbm |
Off |
Input optical power is between -13dbm and 3dbm | |
Normal (CATV) |
On |
Input optical power is between -13dbm and 3dbm |
Off |
Input optical power is higher than 3dbm or lower than -13dbm |
5. Application
l Typical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
l Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.
Figure: All function Optional Application Diagram
6. Ordering information
Product Name |
Product Model |
Descriptions |
EPON ONU 1G3F+WIFI+CATV+POTS |
QF-HE103WCP |
1×10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet , 1 SC/APC Connector, 1x CATV port, 1x RJ11 POTS/TEL, 2.4GHz WIFI, Plastic Casing, External power supply adapter |
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for Manufacturer of 802.11 Ax Wifi - QF-HE103WCP 1GE+3FE+CATV+POTS WIFI EPON – Qualfiber, The product will supply to all over the world, such as: Bulgaria, Washington, Estonia, To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our experienced advice and service can lead to more suitable choice for the customers.
By Josephine from Toronto - 2018.05.13 17:00
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Pamela from Turkey - 2017.06.22 12:49