Color:
OEM Factory for Wifi Ax Extender - xPON ONT 2GE LAN 1200AC WiFi with CATV and POTS QF CXAC200WCP – Qualfiber Detail:
XPON 2GE+1200AC WiFi+CATV+POTS
Overview
l 2GE+1200AC+CATV+POTS is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data and video service access.
l 2GE+1200AC+CATV+POTS is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT.
l 2GE+1200AC+CATV+POTS adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X
l 2GE+1200AC+CATV+POTS is designed by Realtek chipset 9607C.
Feature
l Supports GPON and EPON auto detection
l Support Rogue ONT detection
l Support Route mode PPPoE/DHCP/Static IP and Bridge mixed mode
l Support NAT, Firewall function.
l Support Internet, IPTV and VoIP services automatically bound to ONT ports
l Support Virtual server, DMZ, and DDNS, UPnP
l Support Filtering based on MAC/IP/URL
l Support Access Control
l Support SIP protocol for VoIP Service
l Support 802.11 b/g/n, 802.11ac WIFI(2×2 MIMO) function and Multiple SSID
l Support NAT, Firewall function.
l Support Flow & Storm Control , Loop Detection and Port Forwarding
l Support IPv4/IPv6 dual stack and DS-Lite
l Support IGMP transparent/snooping/proxy
l Support TR069 Remote Configuration and maintenance
l Support CATV remote management from OLT
l Integrated OAM remote configuration and maintenance function
l Compatible with popular OLT (HW, ZTE, FiberHome…)
Specification
|
Technical Item |
Details |
| PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm; Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface |
2 x 10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45 connector |
| WIFI Interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz, rate up to 300Mbps 5.0GHz Operating frequency: 5.150-5.825GHz, rate up to 867Mbps Support 2*2MIMO, 5dBi external antenna. Support: multiple SSID TX power: 11n–22dBm/11ac–24dBm |
| CATV Interface |
RF, optical power : +2~-18dBm Optical reflection loss: ≥60dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV（-7dBm optical input） AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| POTS Interface |
RJ11 Max 1km distance Balanced Ring, 50V RMS |
| LED |
10 LED, For Status of PWR, LOS, PON, LAN1, LAN2, 2.4G, 5.8G, WORN, Normal(CATV), FXS |
| Push-Button |
3 button for Function of Power on/off, Reset, WPS |
| Operating condition |
Temperature : 0℃～+50℃ Humidity :10%～90%（non-condensing） |
| Storing Condition |
Temperature : -40℃～+60℃ Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/1A |
| Power Consumption |
<6W |
| Net Weight |
<0.3kg |
Panel lights and Introduction
|
Pilot Lamp |
Status |
Description |
| 2.4G | On | 2.4G WIFI up |
| Blink | 2.4G WIFI is sending or/and receiving data (ACT). | |
| Off | 2.4G WIFI down | |
| 5.8G | On | 5G WIFI up |
| Blink | 5G WIFI is sending or/and receiving data (ACT). | |
| Off | 5G WIFI down | |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| LOS | Blink | The device doses not receive optical signals or with low signals. |
| Off | The device has received optical signal. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LAN1~LAN2 | On | Port (LANx) is connected properly (LINK). |
| Blink | Port (LANx) is sending or/and receiving data (ACT). | |
| Off | Port (LANx) connection exception or not connected. | |
| FXS | On | Telephone has registered to the SIP Server. |
| Blink | Telephone has registered and data transmission (ACT). | |
| Off | Telephone registration is incorrect. | |
| WORN(CATV) | On | Input optical power is higher than 2dBm or lower than -18dBm |
| Off | Input optical power is between -18dBm and 2dBm | |
| Normal(CATV) | On | Input optical power is between -18dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -18dBm |
Application
l Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home)
l Typical Service：Broadband Internet access, IPV, VOD, video surveillance, CATV etc.
Ordering information
|
Product Name |
Product Model |
Descriptions |
|
2GE+AC+ CATV+POTS XPON |
Model Name:QF-CXAC200WCPModel Series:
CX1112R007 |
2*10/100/1000M, 1 GPON interface, RJ11 interface , built-in FWDM, 1 RF interface, support WIFI 5G&2.4G, support CATV AGC, plastic casing, external power supply adapter |
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
Assume full accountability to fulfill all demands of our purchasers; attain continual advancements by marketing the advancement of our clientele; grow to be the final permanent cooperative partner of purchasers and maximize the interests of purchasers for OEM Factory for Wifi Ax Extender - xPON ONT 2GE LAN 1200AC WiFi with CATV and POTS QF CXAC200WCP – Qualfiber, The product will supply to all over the world, such as: Las Vegas, Singapore, Norwegian, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!
By Nelly from Puerto Rico - 2017.08.18 11:04
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Hilary from Czech republic - 2018.12.28 15:18
