Color:
Wholesale Price 1ge Epon Bridge - QF-HX101WC 1GE+1FE WIFI+CATV XPON ONU (Both GPON and EPON) – Qualfiber Detail:
1. Overview
- 1G1F+WIFI+CATV series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by Qualfiber, The carrier-class FTTH application provides data service access.
- 1G1F+WIFI+CATV series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
- 1G1F+WIFI+CATV series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
- 1G1F+WIFI+CATV series is designed by Realtek chipset.
2. Functional Feature
- Support EPON and GPON Mode, and switch mode automatically
- Support ONU auto-discovery/Link detection/remote upgrade of software
- WAN connections support Route and Bridge mode
- Route mode supports PPPoE/DHCP/ static IP
- Support WIFI Interface and multiple SSID
- Support QoS and DBA
- Support port Isolation and port VLAN configuration
- Support Firewall function and IGMP snooping multicast feature
- Support LAN IP and DHCP Server configuration;
- Support Port Forwarding and Loop-Detect
- Support TR069 remote configuration and maintenance
- Support CATV interface for IPTV, remotely control by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
- Specialized design for system breakdown prevention to maintain stable system
3. Hardware Specification
Technical item | Details |
PON Interface | 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++) |
Receiving sensitivity: ≤-27dBm | |
Transmitting optical power: 0~+4dBm | |
Transmission distance: 20KM | |
Wavelength | TX: 1310nm, RX: 1490nm |
Optical Interface | SC/APC Connector |
LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector |
CATV interface | RF, optical power : +2~-18dBm |
Optical reflection loss: ≥45dB | |
Optical receiving wavelength: 1550±10nm | |
RF frequency range: 47~1000MHz, RF output impedance: 75Ω | |
RF output level: 78dBuV | |
AGC range: 0~-15dBm | |
MER: ≥32dB@-15dBm | |
Wireless | Compliant with IEEE802.11b/g/n, |
Operating frequency: 2.400-2.4835GHz
support MIMO, rate up to 300Mbps,
2T2R,2 external antenna 5dBi,
Support: multiple SSID
Channel: Auto
Modulation type: DSSS, CCK and OFDM
Encoding scheme: BPSK, QPSK, 16QAM and 64QAMLEDStatus of POWER、LOS、PON、SYS、LAN1、LAN2、WIFI、WPS、Internet、Worn(CATV)、Normal(CATV)Push-Button3,For Function of Reset、WLAN、WPSOperating ConditionTemperature: 0℃~+50℃Humidity: 10%~90%(non-condensing)Storing ConditionTemperature: -30℃~+60℃Humidity: 10%~90%(non-condensing)Power SupplyDC 12V/1APower Consumption≤6WDimension155mm×92mm×34mm(L×W×H)Net Weight0.24Kg
4. Panel lights Introduction
Pilot Lamp |
Status |
Description |
PWR |
On |
The device is powered up. |
Off |
The device is powered down. | |
PON |
On |
The device has registered to the PON system. |
Blink |
The device is registering the PON system. | |
Off |
The device registration is incorrect. | |
LOS |
Blink |
The device doses not receive optical signals. |
Off |
The device has received optical signal. | |
SYS |
On |
The device system runs normally. |
Off |
The device system runs abnormally. | |
INTERNET |
Blink |
The device network connection is normal. |
Off |
The device network connection is abnormal. | |
WIFI |
On |
The WIFI interface is up. |
Blink |
The WIFI interface is sending or/and receiving data (ACT). | |
Off |
The WIFI interface is down. | |
WPS |
Blink |
The WIFI interface is securely establishing a connection. |
Off |
The WIFI interface does not establish a secure connection. | |
LAN1 |
On |
Port(LAN1) is connected properly (LINK). |
Blink |
Port(LAN1) is sending or/and receiving data (ACT). | |
Off |
Port(LAN1) connection exception or not connected. | |
LAN2 |
On |
Port(LAN2) is connected properly (LINK). |
Blink |
Port(LAN2) is sending or/and receiving data (ACT). | |
Off |
Port(LAN2) connection exception or not connected. | |
Worn (CATV) |
On |
Input optical power is higher than 3dbm or lower than -13dbm |
Off |
Input optical power is between -13dbm and 3dbm | |
Normal (CATV) |
On |
Input optical power is between -13dbm and 3dbm |
Off |
Input optical power is higher than 3dbm or lower than -13dbm |
5. Application
l Typical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
l Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.
Figure: All function Optional Application Diagram
6. Ordering information
Product Name |
Product Model |
Descriptions |
XPON ONU 1G1F+WIFI+CATV |
QF-HX101WC |
1×10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC/APC Connector,1x CATV RF single fiber port, 2.4GHz WIFI , Plastic Casing, External power supply adapter |
Contact us:
Qualfiber Technology Co., Ltd
Email to us: sales@qualfiber.com
Website: http://www.qualfiber.com
Specifications are subject to change without notice.
Copyright © QUALFIBER TECHNOLOGY. All rights reserved.
Product detail pictures:
Related Product Guide:
What is DWDM? An easy way to understand DWDM and CWDM solution.
Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for Wholesale Price 1ge Epon Bridge - QF-HX101WC 1GE+1FE WIFI+CATV XPON ONU (Both GPON and EPON) – Qualfiber, The product will supply to all over the world, such as: Hungary, Tajikistan, Pakistan, Our solutions are produced with the best raw materials. Every moment, we constantly improve the production programme. In order to ensure better quality and service, we now have been focusing on the production process. We have got high praise by partner. We are looking forward to establishing business relationship with you.
By Carol from Seychelles - 2018.04.25 16:46
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Sarah from Philippines - 2018.09.19 18:37