Multipurpose breakout cable use simplex cable (Diameter 900μm tight buffer fiber, aramid yarn as strength member) as subunit. A fiber reinforced plastic (FRP) locates in the center of core as a nonmetallic strength member. The subunits are stranded around the cable core. The cable is completed with a PVC or LSZH (Low smoke, Zero halogen, Flameretardant) jacket
Color:
Description
Technical data
| No. of cable | 72 | |||
| Fiber Model | G.652 | |||
| Tight lines | Material | PVC | ||
| Thickness（±0.03）mm | 0.32 | |||
| Diameter（±0.06）mm | 0.9 | |||
| Center Strength Member | Material | LDPE | ||
| Diameter（±0.1）mm | 5.8 | |||
| Strength Member | Material | Aramid Yarn | ||
| Inner Sheath | Material | PVC | ||
| Diameter（±0.1）mm | 0.8 | |||
| Colour | Yellow | |||
| Outer Sheath | Material | LSZH | ||
| Thickness（±0.2）mm | 1.6 | |||
| Colour | Black | |||
| Cable Diameter（±0.5）mm | 20.6 | |||
| Cable Wetght（±10）kg/km | 380 | |||
| Attenuation | 1310nm | dB/km | 0.8 | |
| 1550nm | 0.6 | |||
| Allowable Tensile Strength | Short Term | N | 800 | |
| Long Term | 300 | |||
| Allowable Crush Resistance | Short Term | N/100mm | 1400 | |
| Long Term | 300 | |||
| Min. bending radius | Without Tension | 10.0×Cable-φ | ||
| Under Maximum Tension | 20.0×Cable-φ | |||
| Temperature range （℃） |
Installation | -20~+60 | ||
| Transport&Storage | -40~+70 | |||
| Operation | -40~+70 | |||
Tight lines Colours
| NO. | 1 | 2 | 3 | 4 | 5 | 6 |
| Colour | Blue | orange | green | brown | gray | white |
| 7 | 8 | 9 | 10 | 11 | 12 | |
| red | black | Yellow | Violet | Pink | Aqua | |
The properties of single mode optical fiber (ITU-T Rec. G.652.D)
| Item | Specification |
| Fiber type | Single mode |
| Fiber material | Doped silica |
| Attenuation coefficient @ 1310 nm @ 1383 nm @ 1550 nm @ 1625 nm |
£ 0.36 dB/km £ 0.32 dB/km £ 0.22 dB/km £ 0.30 dB/km |
| Point discontinuity | £ 0.05 dB |
| Cable cut-off wavelength | £ 1260 nm |
| Zero-dispersion wavelength | 1300 ~ 1324 nm |
| Zero-dispersion slope | £ 0.092 ps/(nm2.km) |
| Chromatic dispersion @ 1288 ~ 1339 nm @ 1271 ~ 1360 nm @ 1550 nm @ 1625 nm |
£3.5 ps/(nm. km) £5.3 ps/(nm. km) £18 ps/(nm. km) £22 ps/(nm. km) |
| PMDQ (Quadrature average*) | £0.2 ps/km1/2 |
| Mode field diameter @ 1310 nm | 9.2±0.4 um |
| Core / Clad concentricity error | £ 0.5 um |
| Cladding diameter | 125.0 ± 0.7 um |
| Cladding non-circularity | £1.0% |
| Primary coating diameter | 245 ± 10 um |
| Proof test level | 100 kpsi (=0.69 Gpa), 1% |
| Temperature dependence 0oC~ +70oC @ 1310 & 1550nm |
£ 0.1 dB/km |
Sheath marking
The color of marking is white, but if the remarking is necessary, the white color marking shall be printed newly on a different position.
An occasional unclear of length marking is permitted if both of the neighboring markings are clear.
The both cable ends are sealed with heat shrinkable end caps to prevent water ingress.
Write your message here and send it to us
