تحديد تلقائي لكل من شبكة GPON و EPON ، ومنافذ 1GE + 3FE WAN ، و CATV ألياف مفردة ، ومنفذ SC-APC لتقييم الألياف.
Color:
1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access.
1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT.
1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X.
1G3F+CATV ONU is designed by Realtek chipset 9603C.
2.Functional Feature
Support GPON and EPON Mode, and switch mode automatically
Support ONU auto-discovery/Link detection/remote upgrade of software
WAN connections support Route and Bridge mode
Route mode supports PPPoE/DHCP/ static IP
Support QoS and DBA
Support port Isolation and port VLAN configuration
Support Firewall function and IGMP snooping multicast feature
Support LAN IP and DHCP Server configuration;
Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
Support Port Forwarding and Loop-Detect
Support TR069 remote configuration and maintenance
Specialized design for system breakdown prevention to maintain stable system
3.Hardware Specification
البند الفني | تفاصيل |
واجهة PON | 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++) |
حساسية الاستقبال: 28-28dBm | |
نقل الطاقة الضوئية: 0 ~ + 4dBm | |
مسافة الإرسال: 20 كيلومتر | |
الطول الموجي | TX: 1310nm ، RX: 1490nm |
واجهة بصرية | موصل SC / UPC أو حسب الطلب |
واجهة LAN | 1 x 10/100 / 1000Mbps و 3 x 10 / 100Mbps واجهات إيثرنت ذاتية التكيف. كامل / نصف ، موصل RJ45 |
واجهة الكيبل التلفزيوني | RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz, RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm |
يؤدى | حالة الطاقة ، LOS ، PON ، SYS ، LAN1 ~ LAN4 ، الإنترنت ، البالية ، العادية (CATV) |
اضغط الزر | 1 ، لوظيفة إعادة تعيين |
حالة التشغيل | Temperature: 0℃~+50℃ |
Humidity: 10%~90%(non-condensing) | |
Storing Condition | درجة الحرارة: -30 ℃ ~ + 60 ℃ |
Humidity: 10%~90%(non-condensing) | |
مزود الطاقة | DC 12V / 1A |
استهلاك الطاقة | W6W |
البعد | 155mm×92mm×34mm(L×W×H) |
الوزن الصافي | 0.24 كجم |
4. أضواء لوحة مقدمة
مصباح تجريبي |
الحالة |
وصف |
PWR |
على |
تم تشغيل الجهاز. |
إيقاف |
تم إيقاف تشغيل الجهاز. | |
بون |
على |
تم تسجيل الجهاز في نظام PON. |
رمش |
يقوم الجهاز بتسجيل نظام PON. | |
إيقاف |
تسجيل الجهاز غير صحيح. | |
LOS |
رمش |
لا تتلقى جرعات الجهاز إشارات بصرية. |
إيقاف |
تلقى الجهاز إشارة بصرية. | |
SYS |
على |
يعمل نظام الجهاز بشكل طبيعي. |
إيقاف |
يعمل نظام الجهاز بشكل غير طبيعي. | |
الإنترنت |
رمش |
اتصال شبكة الجهاز طبيعي. |
إيقاف |
اتصال شبكة الجهاز غير طبيعي. | |
LAN1 ~ LAN4 |
على |
Port (LANx) is connected properly (LINK). |
رمش |
المنفذ (LANx) يرسل أو يستقبل البيانات (ACT). | |
إيقاف |
استثناء اتصال المنفذ (LANx) أو غير متصل. | |
البالية (الكيبل التلفزيوني) |
على |
Input optical power is higher than 3dbm or lower than -13dbm |
إيقاف |
تتراوح الطاقة الضوئية المدخلة بين -13dbm و 3 dbm | |
عادي (الكيبل التلفزيوني) |
على |
تتراوح الطاقة الضوئية المدخلة بين -13dbm و 3 dbm |
إيقاف |
Input optical power is higher than 3dbm or lower than -13dbm |
5.Application
الحل النموذجي: FTTO (مكتب) 、 FTTB (مبنى) 、 FTTH (المنزل)
Typical Application(optional):INTERNET、IPTV、VOD、VoIP、IP Camera etc.
الشكل: كافة الوظائف مخطط التطبيق الاختياري
6.Ordering information
اسم المنتج |
موديل المنتج |
الأوصاف |
XPON ONU 1G3F +CATV |
QF-HX103C |
1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter |
اتصل بنا:
Qualfiber Technology Co.، Ltd
بريد إلكتروني إلينا: sales@qualfiber.com
الموقع الإلكتروني:https://www.qualfiber.com
المواصفات عرضة للتغيير دون إشعار.
حقوق الطبع والنشر © QUALFIBER TECHNOLOGY. كل الحقوق محفوظة.