Kejbil tal-kejbil barra tal-metall mhux metalliku maħlul GYFXTY
Color:
Deskrizzjoni
Dettalji dwar il-kostruzzjoni tal-kejbil:
| Numru ta 'fibra | 2 ~ 24 F | |||||||
| Barriera ta 'l-Umdità | Tejp li jimblokka l-ilma | |||||||
| Tubu sfuż | materjal | PBT | ||||||
| Dijametru tal- | Ф2.2 (barra / ġewwa) | |||||||
| Mili tat-tubi | Tubu tal-mili kompost | |||||||
| Membru tal-Qawwa | materjal | FRP | ||||||
| Dijametru tal- | 2 pcs | |||||||
| Għant ta 'barra | materjal | PE | ||||||
| Dijametru tal- | 1.8 ± 0.2mm | |||||||
Kulur tal-Fibra
| Le. | 1 | 2 | 3 | 4 | 5 | 6 |
| Kulur |  |
 |
 |
 |
 |
 |
| Le. | 7 | 8 | 9 | 10 | 11 | 12 |
| Kulur |  |
 |
 |
 |
 |
 |
Kulur tat-Tubu
Kejbil Karatteristika mekkanika
| tal-qalba | Dijametru tal-kejbil | Piż | |||||
| 2 ~ 24 | 7.2mm | 45 ± 2kg / km | |||||
| Radju tal-Liwi Minimu (mm) | Fit-tul | 10D | |||||
| Liwi Min (mm) |
Għal żmien qasir | 20D | |||||
| Minjiera permessa (N) |
Fit-tul | 500 | |||||
| Minjiera permessa (N) |
Għal żmien qasir | 1200 | |||||
| Tgħaffiġ tat-Tgħaffiġ (N / 100mm) | Fit-tul | 300 | |||||
| Tgħaffiġ tat-Tgħaffiġ (N / 100mm) | Għal żmien qasir | 1000 | |||||
| Operazzjoni （℃） |
-40 + 70 | ||||||
| Installazzjoni （℃） |
-20 + 60 | ||||||
Fibra karatteristika
| L-istil tal-fibra | Unità | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5 / 125 |
MM OM3-300 |
|
| kundizzjoni | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| attenwazzjoni | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0.36 / 0.23 | 0.34 / 0.22 | 3.0 / 1.0 | —- | —- | |||
| Dispersjoni | 1550nm | Ps / (nm * km) | —- | ≤18 | —- | —- | Dispersjoni |
| 1625nm | Ps / (nm * km) | —- | ≤22 | —- | —- | ||
| Bandwith | 850nm | MHZ.KM | —- | —- | ≧ 400 | ≧ 160 | Bandwith |
| 1300nm | MHZ.KM | —- | —- | ≧ 800 | ≧ 500 | ||
| Tul ta 'mewġa ta' tixrid żero | nm | 1300-1324 | ≧ 1302, ≤1322 |
—- | —- | ≧ 1295, ≤1320 |
|
| Inklinazzjoni ta 'żero dispersjoni | nm | ≤0.092 | ≤0.091 | —- | —- | —- | |
| Fibra Individwali Massima PMD | ≤0.2 | ≤0.2 | —- | —- | ≤0.11 | ||
| Valur tal-Link tad-Disinn tal-PMD | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | —- | —- | —- | |
| Tul tal-mewġa tal-qtugħ tal-fibra λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
—- | —- | —- | |
| Cable cutoff λcc |
nm | ≤1260 | ≤1260 | —- | —- | —- | |
| MFD | 1310nm | um | 9.2 +/- 0.4 | 9.2 +/- 0.4 | —- | —- | —- |
| 1550nm | um | 10.4 +/- 0.8 | 10.4 +/- 0.8 | —- | —- | —- | |
| Numeriku (NA) |
—- | —- | 0.200 + / -0.015 |
0.275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
| Stadju (medja tal- ) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Irregolaritajiet fuq length and point |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Dicontinuity | |||||||
| Differenza backscatter coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Uniformità tal-attenwazzjoni | dB / km | ≤0.01 | ≤0.01 | ||||
| Qalba tad-dimater | um | 50 +/- 1.0 | 62.5 +/- 2.5 | 50 +/- 1.0 | |||
| Dijametru tal-kisi | um | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | |
| Kisi tal-kisja mhux ċirkolarità | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Dijametru tal-kisi | um | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Coating/chaffinch konċentrikament |
um | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Kisi b'ċirkolarità | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Żball tal-qalba / kisi tal-konċentriċità | um | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Curl (raġġ) | um | ≤4 | ≤4 | —- | —- | —- | |
Pakkett
| 1.Pakkjar tal-materjal: tanbur tal-injam | |||||||
| 2. It-tul tal-ippakkjar: It-tul standard tal-kejbil għandu jkun ta '2 km. Tul tal-kejbil ieħor huwa wkoll disponibbli | |||||||
| jekk meħtieġ mill-klijent |
Immarkar tal-kejbil u mmarkar tar-rukkell tal-kejbil
Il-għant tal-kejbil għandu jkun immarkat b'karattri bojod skont il-ħtieġa tal-klijent.
Write your message here and send it to us
