Henteu kabel logam tengah ngeculkeun kabel luar GYFXTY
Color:
Katerangan
Rincian konstruksi kabel:
| Jumlah serat | 2 ~ 24 F | |||||||
| Halangan Lembab | Pencét cai | |||||||
| Leungit pipah | matérial | PBT | ||||||
| Diameter | Ф2.2 (luar / jero) | |||||||
| Tube-ngeusian | Témo anu ngeusian sanyawa | |||||||
| Anggota kakuatan | matérial | FRP | ||||||
| Diameter | 2 PCS | |||||||
| Malang jero | matérial | Péd | ||||||
| Diameter | 1,8 ± 0.2mm | |||||||
Warna Serat
| Teu. | 1 | 2 | 3 | 4 | 5 | 6 |
| Warna |  |
 |
 |
 |
 |
 |
| Teu. | 7 | 8 | 9 | 10 | 11 | 12 |
| Warna |  |
 |
 |
 |
 |
 |
Warna Tube
Listrik ciri mékanis
| inti | Diaméter kabel | Beurat | |||||
| 2 ~ 24 | 7.2mm | 45 ± 2kg / km | |||||
| Min Bending Radius (mm) | Jangka panjang | 10D | |||||
| Min Bending Radius (mm) |
Jangka pondok | 20D | |||||
| Min ku Kuat Tensile Kuat (N) |
Jangka panjang | 500 | |||||
| Min ku Kuat Tensile Kuat (N) |
Jangka pondok | 1200 | |||||
| Beban Crush (N / 100mm) | Jangka panjang | 300 | |||||
| Beban Crush (N / 100mm) | Jangka pondok | 1000 | |||||
| Operasi （℃） |
-40 + 70 | ||||||
| Pamasangan （℃） |
-20 + 60 | ||||||
Serat ciri
| Gaya serat | Unit | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5 / 125 |
MM OM3-300 |
|
| kaayaan | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| atenuasi | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0,36 / 0.23 | 0,34 / 0.22 | 3,0 / 1.0 | —- | —- | |||
| Kasebar | 1550nm | Ps / (nm * km) | —- | ≤18 | —- | —- | Kasebar |
| 1625nm | Ps / (nm * km) | —- | ≤22 | —- | —- | ||
| Bandwith | 850nm | MHZ.KM | —- | —- | ≧ 400 | ≧ 160 | Bandwith |
| 1300nm | MHZ.KM | —- | —- | 800 | ≧ 500 | ||
| Gelombang penyebaran zero | nm | 1300-1324 | ≧ 1302, ≤1322 |
—- | —- | ≧ 1295, ≤1320 |
|
| Lereng panyebaran Zero | nm | ≤0.092 | ≤0.091 | —- | —- | —- | |
| Serat Individu PMD Maksimum | ≤0.2 | ≤0.2 | —- | —- | ≤0.11 | ||
| Nilai Patalina PMD Desain | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | —- | —- | —- | |
| Serat panjang gelombang cutoff λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
—- | —- | —- | |
| Cable cutoff λcc |
nm | ≤1260 | ≤1260 | —- | —- | —- | |
| MFD | 1310nm | Ehm | 9.2 +/- 0,4 | 9.2 +/- 0,4 | —- | —- | —- |
| 1550nm | Ehm | 10,4 +/- 0,8 | 10,4 +/- 0,8 | —- | —- | —- | |
| Nomer (NA) |
—- | —- | 0,200 + / -0.015 |
0,275 +/- 0. 015 |
0,200 +/- 0 .015 |
||
| Léngkah (maksud ) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Kaanggotaan tina serat panjang sareng titik |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Kasalahan | |||||||
| Bédana tukang-tukang bédana |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Kaasaruaan Attenuasi | dB / km | ≤0.01 | ≤0.01 | ||||
| Dimater inti | Ehm | 50 +/- 1.0 | 62.5 +/- 2,5 | 50 +/- 1.0 | |||
| Diaméteran panyétok | Ehm | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | |
| Panutupan non-sirkularitas | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Diaméter palapis | Ehm | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Palapis / chaffinch konsentrasi kasalahan |
Ehm | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Palapis non circularity | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Kasalahan konperénsi inti / cladding | Ehm | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Keriting (radius) | Ehm | ≤4 | ≤4 | —- | —- | —- | |
Pakét
| Bahan 1.Packing: Gendong kayu | |||||||
| 2.Packing panjang: Panjang kabel baku 2 km. Panjang kabel sanésna ogé sayogi | |||||||
| upami diperlukeun ku nasabah |
Nyirian kabel sareng kabel reel
Sarung kabel kedah ditandaan ku karakter bodas nurutkeun sarat palanggan.
Write your message here and send it to us
