GYTY53 (metal strengthening member, loose tube layer stranded filling type, polyethylene sheath, longitudinally wrapped corrugated steel tape armor, polyethylene sheathed outdoor optical fiber cable for communication) The structure of the optical cable is a single-mode or multi-mode optical fiber sheathed by a high-mode optical fiber The waterproof compound loose tube is filled with a large amount of plastic. The center of the cable core is a metal reinforced core. For some fiber optic cables, the metal reinforced core is also extruded with a layer of polyethylene (PE). The loose tube (and filling rope) is twisted around the central reinforcing core to form a compact and circular cable core, and the gaps in the cable core are filled with water blocking compounds. The cable core is extruded with a polyethylene inner sheath, and the double-sided plastic-coated steel tape is longitudinally wrapped and then extruded with the polyethylene sheath.
Color:
Katerangan
Rincian konstruksi kabel:
| Jumlah serat | 24-288 cores | |||||||
| Keusian tali | 4-0 | |||||||
| Halangan Lembab | Sistem blokir cai | |||||||
| Anggota kakuatan sentral | matérial | Kawat baja / FRP | ||||||
| ukuran | 1.4mm | |||||||
| Tube-ngeusian | Tube ngeusian kompoun | |||||||
| Malapah jero | matérial | Pe / HDPE | ||||||
| Diameter | 2.0mm | |||||||
| Leungit pipah | matérial | PBT | ||||||
| Diameter | Ф2.2 (luar / jero) | |||||||
| Pergaulan luar negeri | matérial | Pita aluménét / Pita baja rusak | ||||||
| Malang jero | matérial | Pe / HDPE | ||||||
| Diameter | 1,7 ± 0.2mm | |||||||
Warna Serat
Note: Color 13~24 will be marked with a black tracer. For black color, no need marked black tracer will use natural color instead.
Loose tube color
Listrik ciri mékanis
| inti | Diaméter kabel | beurat | |||||
| 24 inti ka 60core | 12,0 ± 0.2mm | 150 ± 10kg / km | |||||
| 62 inti pikeun 72core | 12,5 ± 0.5mm | 210 ± 10kg / km | |||||
| 74 inti kanggo 96core | 14,1 ± 0.5mm | 230 ± 10kg / km | |||||
| 98 inti ka 144core | 16,5 ± 0.5mm | 250 ± 10kg / km | |||||
| Min Bending Radius (mm) | Jangka panjang | 10D | |||||
| Min Bending Radius(mm) |
Jangka pondok | 20D | |||||
| Min ku Tensile Strength(N) |
Jangka panjang | 3000 | |||||
| Min ku Tensile Strength(N) |
Jangka pondok | 4000 | |||||
| Min. Beban Crush Ngahasilkeun (N / 100mm) | Jangka panjang | 1000 | |||||
| Min. Beban Crush Ngahasilkeun (N / 100mm) | jangka pondok | 3000 | |||||
| Operasi temperature （℃） |
-40 + 70 | ||||||
| Pamasangan temperature（℃） |
-15 + 60 | ||||||
| Panyimpen temprature （℃） |
-40 + 70 | ||||||
Serat ciri
| Gaya serat | Unit | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
| kaayaan | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| atenuasi | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0,36 / 0.23 | 0,34 / 0.22 | 3,0 / 1.0 | ---- | ---- | |||
| Nyebatna | 1550nm | Ps / (nm * km) | ---- | ≤18 | ---- | ---- | Nyebatna |
| 1625nm | Ps / (nm * km) | ---- | ≤22 | ---- | ---- | ||
| Bandwith | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | Bandwith |
| 1300nm | MHZ.KM | ---- | ---- | 800 | ≧ 500 | ||
| Gelombang penyebaran zero | nm | 1300-1324 | ≧ 1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
| Lamping Zero lamping | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
| Fibril Individu PMD Maksimum | ≤0.2 | ≤0.2 | ---- | ---- | ≤0.11 | ||
| Nilai Patalina PMD Desain | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | ---- | ---- | ---- | |
| Serat panjang gelombang cutoff λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
---- | ---- | ---- | |
| Panjang wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
| MFD | 1310nm | Ehm | 9.2 +/- 0,4 | 9.2 +/- 0,4 | ---- | ---- | ---- |
| 1550nm | Ehm | 10,4 +/- 0,8 | 10,4 +/- 0,8 | ---- | ---- | ---- | |
| Nomer Aperture(NA) |
---- | ---- | 0,200 + / -0.015 |
0,275 +/- 0. 015 |
0,200 +/- 0 .015 |
||
| Léngkah (maksud measurement) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Kaanggotaan tina serat length and point |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Kasalahan | |||||||
| Bédana tukang-tukang coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Kaasaruaan Attenuasi | dB / km | ≤0.01 | ≤0.01 | ||||
| Dimater inti | Ehm | 50 +/- 1.0 | 62.5 +/- 2,5 | 50 +/- 1.0 | |||
| Diaméteran panyétok | Ehm | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | |
| Panutupan non-sirkularitas | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Diaméter palapis | Ehm | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Palapis / chaffinch concentrically error |
Ehm | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Palapis non circularity | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Kasalahan konperénsi inti / cladding | Ehm | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Keriting (radius) | Ehm | ≤4 | ≤4 | ---- | ---- | ---- | |
Pakét
| Bahan 1.Packing: Gendong kayu | |||||||
| Panjangna 2.Packing: panjang kabel baku kedah 2 km. Panjang kabel sanésna ogé availabler | |||||||
| upami diperlukeun ku custome |
| Gaya serat | Unit | SM G652D | MM 50/125 | MM 62.5 / 125 | ||||
| Kaayaan | mm | 1310/1550 | 850/1300 | 850/1300 | ||||
| Attenuasi | dB / km | ≤0.36/0.22 | ≤3.0 / 1.0 | ≤3.0 / 1.0 | ||||
| Diaméteran panyétok | Ehm | 125 ± 1 | 125 ± 1 | 125 ± 1 | ||||
| Panutupan non-sirkularitas | % | ≤1.0 | ≤1.0 | ≤1.0 | ||||
| Diaméter palapis | Ehm | 242 ± 7 | 242 ± 7 | 242 ± 7 | ||||
Write your message here and send it to us
