Imininingwane Yomkhiqizo

Incazelo

Ukwakhiwa kwamakhebuli:

Out Diameter(MM)	1.6			Isisindo (KG)	2.8
	1.8				3.0
	2.0				4.3
	2.4				5.0
	2.8				6.6
	3.0				7.0
Storage temperature（℃）			-20 + 60
Min Bending Radius(mm)		Isikhati eside	10D
Min Bending Radius (mm)		Isikhathi esifushane	20D
Min allowable Tensile Strength(N)		Isikhati eside	80
Min allowable Tensile Strength(N)		Isikhathi esifushane	150
Crush Load (N/100mm)		Isikhati eside	100
Crush Load (N/100mm)		short term	500

Isimilo sefilidi

Isitayela sefayibha		Iyunithi	I-SM G652	I-SM G652D	MM 50/125	MM 62.5 / 125	MM OM3-300
isimo		nm	1310/1550	1310/1550	850/1300	850/1300	850/1300
ukuzithoba		dB / km	≤	≤	≤	≤3.0 / 1.0	≤3.0 / 1.0
ukuzithoba		dB / km	0.36 / 0.23	0.34 / 0.22	3.0 / 1.0	——	——
Ukusaphazeka	1550nm	IHu / (nm * km)	——	≤18	——	——	Ukusaphazeka
Ukusaphazeka	1625nm	IHu / (nm * km)	——	≤22	——	——
I-Bandwith	I-850nm	MHZ.KM	——	——	≧ 400	≧ 160	I-Bandwith
I-Bandwith	1300nm	MHZ.KM	——	——	≧ 800	≧ 500
Zero dispersion wavelength		nm	1300-1324	≧ 1302, ≤1322	——	——	≧ 1295, ≤1320
Zero dispresion slope		nm	≤0.092	≤0.091	——	——	——
PMD Maximum Individual Fibr		≤0.2	≤0.2	——	——	≤0.11
PMD Design Link Value		IHu (nm2 * k m)	≤0.12	≤0.08	——	——	——
Fibre cutoff wavelength λc		nm	≧ 1180, ≤1330	≧ 1180, ≤1330	——	——	——
Cable sutoff wavelength λcc		nm	≤1260	≤1260	——	——	——
I-MFD	1310nm	am	9.2 +/- 0.4	9.2 +/- 0.4	——	——	——
I-MFD	1550nm	am	10.4 +/- 0.8	10.4 +/- 0.8	——	——	——
Izinombolo Zokuhlunga (NA)		——	——	0.200 + / -0.015	0.275 +/- 0. 015	0.200 +/- 0 .015
Step(mean of bidirectional isilinganiso sokulinganisa)		dB	≤0.05	≤0.05	≤0.10	≤0.10	≤0.10
Irregularities over fiber length and point		dB	≤0.05	≤0.05	≤0.10	≤0.10	≤0.10
I-Dicontinuity
Difference backscatter Coefficient		dB / km	≤0.05	≤0.03	≤0.08	≤0.10	≤0.08
Attenuation uniformity		dB / km	≤0.01	≤0.01
Core dimater		am	50 +/- 1.0	62.5 +/- 2.5	50 +/- 1.0
Ububanzi be-Cladding		am	125.0 +/- 0,1	125.0 +/- 0,1	125.0 +/- 0,1	125.0 +/- 0,1	125.0 +/- 0,1
Ukulengiswa okungasiyisiyingi		%	≤1.0	≤1.0	≤1.0	≤1.0	≤1.0
Ububanzi bokunamathela		am	242 +/- 7	242 +/- 7	242 +/- 7	242 +/- 7	242 +/- 7
Coating/chaffinch concentrically error		am	≤12.0	≤12.0	≤12.0	≤12.0	≤12.0
Coating non circularity		%	≤6.0	≤6.0	≤6.0	≤6.0	≤6.0
Core/cladding conentricity error		am	≤0.6	≤0.6	≤1.5	≤1.5	≤1.5
I-Curl (engaba)		am	≤4	≤4	——	——	——