Apejuwe Ọja

Apejuwe

Ikole USB:

Out Diameter(MM)	1,6			Iwuwo (KG)	2,8
	1.8				3.0
	2.0				4.3
	2,4				5,0
	2,8				6.6
	3.0				7.0
Storage temperature（℃）			-20 + 60
Min Bending Radius(mm)		Igba gígun	10D
Min Bending Radius (mm)		Igba kukuru	20D
Min allowable Tensile Strength(N)		Igba gígun	80
Min allowable Tensile Strength(N)		Igba kukuru	150
Crush Load (N/100mm)		Igba gígun	100
Crush Load (N/100mm)		short term	500

Ti iwa abuda

Ara ara		Ẹgbẹ	SM G652	SM G652D	MM 50/125	MM 62.5 / 125	MM OM3-300
majemu		nm	1310/1550	1310/1550	850/1300	850/1300	850/1300
attenuation		dB / km	≤	≤	≤	≤3.0 / 1.0	≤3.0 / 1.0
attenuation		dB / km	0.36 / 0.23	0.34 / 0.22	3.0 / 1.0	—-	—-
Ifihan	1550nm	Ps / (nm * km)	—-	18	—-	—-	Ifihan
Ifihan	1625nm	Ps / (nm * km)	—-	≤22	—-	—-
Band Pẹlu	850nm	MHZ.KM	—-	—-	≧ 400	≧ 160	Band Pẹlu
Band Pẹlu	1300nm	MHZ.KM	—-	—-	≧ 800	500
Zero dispersion wavelength		nm	1300-1324	1302, ≤1322	—-	—-	≧ 1295, ≤1320
Zero dispresion slope		nm	≤0.092	≤0.091	—-	—-	—-
PMD Maximum Individual Fibr		≤0.2	≤0.2	—-	—-	≤0.11
PMD Design Link Value		Ps (nm2 * k m)	≤0.12	≤0.08	—-	—-	—-
Fibre cutoff wavelength λc		nm	≧ 1180, ≤1330	1180, ≤1330	—-	—-	—-
Cable sutoff wavelength λcc		nm	≤1260	≤1260	—-	—-	—-
MFD	1310nm	um	9.2 +/- 0.4	9.2 +/- 0.4	—-	—-	—-
MFD	1550nm	um	10.4 +/- 0.8	10.4 +/- 0.8	—-	—-	—-
Onipeye Nọmba (NA)		—-	—-	0.200 + / -0.015	0.275 +/- 0. 015	0.200 +/- 0 .015
Step(mean of bidirectional )		dB	≤0.05	≤0.05	≤0.10	≤0.10	≤0.10
Irregularities over fiber length and point		dB	≤0.05	≤0.05	≤0.10	≤0.10	≤0.10
Dicontinuity
Difference backscatter afọwọkọ		dB / km	≤0.05	≤0.03	≤0.08	≤0.10	≤0.08
Attenuation uniformity		dB / km	≤0.01	≤0.01
Core dimater		um	50 +/- 1.0	62,5 +/- 2,5	50 +/- 1.0
Iwọn agekuru		um	125.0 +/- 0.1	125.0 +/- 0.1	125.0 +/- 0.1	125.0 +/- 0.1	125.0 +/- 0.1
Ṣiṣe agekuru ti kii ṣe ipin		%	≤1.0	≤1.0	≤1.0	≤1.0	≤1.0
Iwọn ila opin		um	242 +/- 7	242 +/- 7	242 +/- 7	242 +/- 7	242 +/- 7
Ibopọ / chaffinch concentrically error		um	≤12.0	≤12.0	≤12.0	≤12.0	≤12.0
Coating non circularity		%	6.0	6.0	6.0	6.0	6.0
Core/cladding conentricity error		um	≤0.6	≤0.6	≤1.5	≤1.5	≤1.5
Okuta (radius)		um	≤4	≤4	—-	—-	—-