Tlhahisoleseling

Tlhaloso

Ho haha Cable:

Out Diameter(MM)	1.6			Boima (KG)	2.8
	1.8				3.0
	2.0				4.3
	2.4				5.0
	2.8				6.6
	3.0				7.0
Storage temperature（℃）			-20 + 60
Min Bending Radius(mm)		Nako e telele	10D
Min Bending Radius (limilimithara)		Nako e khutšoane	20D
Min allowable Tensile Strength(N)		Nako e telele	80
Min allowable Tensile Strength(N)		Nako e khutšoane	150
Crush Load (N/100mm)		Nako e telele	100
Crush Load (N/100mm)		short term	500

Sebopeho sa fiber

Mokhoa oa feshene		Setsi	SM G652	SM G652D	MM 50/125	MM 62,5 / 125	MM OM3-300
boemo		nm	1310/1550	1310/1550	850/1300	850/1300	850/1300
tumello		dB / km	≤	≤	≤	≤3.0 / 1.0	≤3.0 / 1.0
tumello		dB / km	0.36 / 0.23	0.34 / 0.22	3.0 / 1.0	—-	—-
Khatello	1550nm	Ps / (nm * km)	—-	≤18	—-	—-	Khatello
Khatello	1625nm	Ps / (nm * km)	—-	≤22	—-	—-
Bandwith	850nm	MHZ.KM	—-	—-	≧ 400	≧ 160	Bandwith
Bandwith	1300nm	MHZ.KM	—-	—-	≧ 800	≧ 500
Zero dispersion wavelength		nm	1300-1324	≧ 1302, ≤1322	—-	—-	≧ 1295, ≤1320
Zero dispresion slope		nm	≤0.092	≤0.091	—-	—-	—-
PMD Maximum Individual Fibr		≤0.2	≤0.2	—-	—-	≤0.11
PMD Design Link Value		Ps (nm2 * k m)	≤0.12	≤0.08	—-	—-	—-
Fibre cutoff wavelength λc		nm	≧ 1180, ≤1330	≧ 1180, ≤1330	—-	—-	—-
Cable sutoff wavelength λcc		nm	≤1260	≤1260	—-	—-	—-
MFD	1310nm	mm	9.2 +/- 0.4	9.2 +/- 0.4	—-	—-	—-
MFD	1550nm	mm	10.4 +/- 0.8	10.4 +/- 0.8	—-	—-	—-
Lipalo tsa lipalo (NA)		—-	—-	0.200 + / -0.015	0.275 +/- 0. 015	0.200 +/- 0 .015
Step(mean of bidirectional )		dB	≤0.05	≤0.05	≤0.10	≤0.10	≤0.10
Irregularities over fiber length and point		dB	≤0.05	≤0.05	≤0.10	≤0.10	≤0.10
Ts'ebetso
Difference backscatter coefficient		dB / km	≤0.05	≤0.03	≤0.08	≤0.10	≤0.08
Attenuation uniformity		dB / km	≤0.01	≤0.01
Core dimater		mm	50 +/- 1.0	62.5 +/- 2,5	50 +/- 1.0
Bophara ba cladding		mm	125.0 +/- 0,1	125.0 +/- 0,1	125.0 +/- 0,1	125.0 +/- 0,1	125.0 +/- 0,1
Ho roala metheo e sa potoloha		%	≤1.0	≤1.0	≤1.0	≤1.0	≤1.0
Bophara ba koae		mm	242 +/- 7	242 +/- 7	242 +/- 7	242 +/- 7	242 +/- 7
Li-coating / chaffinch concentrically error		mm	≤12.0	≤12.0	≤12.0	≤12.0	≤12.0
Coating non circularity		%	≤6.0	≤6.0	≤6.0	≤6.0	≤6.0
Core/cladding conentricity error		mm	≤0.6	≤0.6	≤1.5	≤1.5	≤1.5
Curl (radius)		mm	≤4	≤4	—-	—-	—-