GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
Color:
Priskribo
GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
GY—— Communication room (field) outdoor optical cable
X —— Cable center tube (covering) structure
T —— Filled structure
W —— Steel polyethylene bonded sheath with steel wire entrained (referred to as W sheath)
Detaloj pri kablokonstruado
Nombro de fibro | 1 ~ 24core | |||||||
Loza tubo | materialo | PBT | ||||||
diametro | Ф2.2 (ekstera / interna) | |||||||
Tubo-plenigado | Tuba pleniga komponaĵo | |||||||
Ŝtalo-drato | grandeco | 0,8mm | ||||||
Nombro | 2 | |||||||
Ekstera tegaĵo | materialo | PE, HDPE, LDPE | ||||||
diametro | 1.8 ± 0.2mm |
Fibra Koloro
Ne | 1 | 2 | 3 | 4 | 5 | 6 |
Koloro | ||||||
Ne | 7 | 8 | 9 | 10 | 11 | 12 |
Koloro | ||||||
Ne | 13 | 14 | 15 | 16 | 17 | 18 |
Koloro | ||||||
Ne | 19 | 20 | 21 | 22 | 23 | 24 |
Koloro |
Tuba Koloro
Kabla Mekanika trajto
kerno | Kablo-diametro | pezo | |||||
1 ~ 24 | 8,0mm + -0,3mm | 65kg / km + -10kg | |||||
Temperaturo gamo | -40 + 70 | ----- | |||||
Min-Kurbiga Radiuso (mm) | Longtempe | 10D | |||||
Min-Kurbiga Radius(mm) |
Mallongatempa | 20D | |||||
Min permesebla Tensile Strength(N) |
Longtempe | 1200 | |||||
Min permesebla Tensile Strength(N) |
Mallongatempa | 1500 | |||||
Operacio temperature (℃) |
-40 + 70 | ||||||
Instalado temperature(℃) |
-20 + 60 | ||||||
Tenita temperaturo (℃) |
-40 + 70 |
Fibra trajto
Fibra stilo | Unueco | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
kondiĉo | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
mildigo | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
0,36 / 0,23 | 0,34 / 0,22 | 3.0 / 1.0 | ---- | ---- | |||
Dispremo | 1550nm | Ps / (nm * km) | ---- | ≤18 | ---- | ---- | Dispremo |
1625 nm | Ps / (nm * km) | ---- | ≤22 | ---- | ---- | ||
Bandwith | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | Bandwith |
1300nm | MHZ.KM | ---- | ---- | ≧ 800 | ≧ 500 | ||
Longa ondolongo de nulo | nm | 1300-1324 | ≧ 1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
Nulo-disprezenta deklivo | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
PMD Maksimuma Individua Fibro | ≤0.2 | ≤0.2 | ---- | ---- | ≤0.11 | ||
PMD-Ligo-Valora Ligo | Ps (nm2 * k m) |
≤0.12 | ≤0,08 | ---- | ---- | ---- | |
Fibra fortranĉa ondolongo λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
---- | ---- | ---- | |
Korda sutofa wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
MFD | 1310nm | um | 9,2 +/- 0,4 | 9,2 +/- 0,4 | ---- | ---- | ---- |
1550nm | um | 10,4 +/- 0,8 | 10,4 +/- 0,8 | ---- | ---- | ---- | |
Numerala Aperture(NA) |
---- | ---- | 0.200 + / -0.015 |
0,275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
Paŝo (mezumo de dudirekta measurement) |
dB | ≤0,05 | ≤0,05 | ≤0.10 | ≤0.10 | ≤0.10 | |
Malregulaĵoj super fibro- length and point |
dB | ≤0,05 | ≤0,05 | ≤0.10 | ≤0.10 | ≤0.10 |
Dicontinuity | |||||||
Diferenco de retroaktiva coefficient |
dB / km | ≤0,05 | ≤0,03 | ≤0,08 | ≤0.10 | ≤0,08 | |
Atenuado-unuformeco | dB / km | ≤0.01 | ≤0.01 | ||||
Kerna dimaterio | um | 50 +/- 1.0 | 62,5 +/- 2,5 | 50 +/- 1.0 | |||
Diametro de mantelo | um | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | |
Klapita necirkulado | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
Kovranta diametro | um | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
Kovrilo / ĉasko concentrically error |
um | ≤12,0 | ≤12,0 | ≤12,0 | ≤12,0 | ≤12,0 | |
Tavo ne cirkuli | % | ≤6,0 | ≤6,0 | ≤6,0 | ≤6,0 | ≤6,0 | |
Kerna / revesta eraro de koncentreco | um | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
Curl (radio) | um | ≤4 | ≤4 | ---- | ---- | ---- |
Pako
1.Paka materialo: Ligno-tamburo | |||||||
2.Paka longo: norma longo de la kablo devas esti 2 km. Alia kablo-longo ankaŭ haveblas | |||||||
se bezonataj de klientoj |
Kablomarko kaj markado de kablo
La kablo devas esti markita kun blankaj signoj laŭ la postulo de la kliento.
Write your message here and send it to us