GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
Color:
Paglalarawan
GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
GY—— Communication room (field) outdoor optical cable
X —— Cable center tube (covering) structure
T —— Filled structure
W —— Steel polyethylene bonded sheath with steel wire entrained (referred to as W sheath)
Mga detalye sa konstruksiyon ng cable
| Bilang ng mga hibla | 1 ~ 24core | |||||||
| Loose tube | materyal | PBT | ||||||
| diameter | Ф2.2 (panlabas / panloob) | |||||||
| Pagpupuno ng tubo | Tube ng pagpuno | |||||||
| Mga wire na bakal | laki | 0.8mm | ||||||
| Bilang | 2 | |||||||
| Outer sheath | materyal | PE, HDPE, LDPE | ||||||
| diameter | 1.8 ± 0.2mm | |||||||
Kulay ng Serat
| Hindi. | 1 | 2 | 3 | 4 | 5 | 6 |
| Kulay |  |
 |
 |
 |
 |
 |
| Hindi. | 7 | 8 | 9 | 10 | 11 | 12 |
| Kulay |  |
 |
 |
 |
 |
 |
| Hindi. | 13 | 14 | 15 | 16 | 17 | 18 |
| Kulay |  |
 |
 |
 |
 |
 |
| Hindi. | 19 | 20 | 21 | 22 | 23 | 24 |
| Kulay |  |
 |
 |
 |
 |
 |
Kulay ng Tube
Katangian ng Cable Mekanikal
| pangunahing | Diameter ng cable | bigat | |||||
| 1 ~ 24 | 8.0mm + -0.3mm | 65kg / km + -10kg | |||||
| Saklaw ng temperatura | -40 + 70 | ----- | |||||
| Min Bending Radius (mm) | Pangmatagalan | 10D | |||||
| Min Bending Radius(mm) |
Panandalian | 20D | |||||
| Min pinapayagan ang Tensile Strength(N) |
Pangmatagalan | 1200 | |||||
| Min pinapayagan ang Tensile Strength(N) |
Panandalian | 1500 | |||||
| Operasyon temperature （℃） |
-40 + 70 | ||||||
| Pag-install temperature（℃） |
-20 + 60 | ||||||
| Imbakan ng pag-iimbak （℃） |
-40 + 70 | ||||||
Katangian na hibla
| Estilo ng hibla | Unit | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
| kondisyon | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| pagpapalambing | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0.36 / 0.23 | 0.34 / 0.22 | 3.0 / 1.0 | ---- | ---- | |||
| Pagpapahayag | 1550nm | Ps / (nm * km) | ---- | ≤18 | ---- | ---- | Pagpapahayag |
| 1625nm | Ps / (nm * km) | ---- | ≤22 | ---- | ---- | ||
| Bandwith | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | Bandwith |
| 1300nm | MHZ.KM | ---- | ---- | ≧ 800 | ≧ 500 | ||
| Zero na pagpapakalat ng zero | nm | 1300-1324 | ≧ 1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
| Zero ng pagbubunyag ng zero | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
| PMD Maximum na Indibidwal na Fibr | ≤0.2 | ≤0.2 | ---- | ---- | ≤0.11 | ||
| Halaga ng Link ng Disenyo ng PMD | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | ---- | ---- | ---- | |
| Fiber cutoff haba ng daluyong λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
---- | ---- | ---- | |
| Cable sutoff wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
| MFD | 1310nm | um | 9.2 +/- 0.4 | 9.2 +/- 0.4 | ---- | ---- | ---- |
| 1550nm | um | 10.4 +/- 0.8 | 10.4 +/- 0.8 | ---- | ---- | ---- | |
| Numerical Aperture(NA) |
---- | ---- | 0.200 + / -0.015 |
0.275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
| Hakbang (ibig sabihin ng measurement) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Mga pagkakaugnay sa length and point |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Dicontinuity | |||||||
| Pagkakaiba ng backscatter coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Pagkakapareho ng attenuation | dB / km | ≤0.01 | ≤0.01 | ||||
| Core dimater | um | 50 +/- 1.0 | 62.5 +/- 2.5 | 50 +/- 1.0 | |||
| Diameter ng pag-cladding | um | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | |
| Pag-clad ng di-bilog | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Diameter lapad | um | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Ang patong / chaffinch ay lubusang concentrically error |
um | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Ang patong na hindi bilog | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Ang error sa konsyensya / pag-cladding | um | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Kulot (radius) | um | ≤4 | ≤4 | ---- | ---- | ---- | |
Pakete
| 1.Packing material: Wooden drum | |||||||
| 2.Packing haba: karaniwang haba ng cable ay dapat na 2 km. Ang iba pang haba ng cable ay magagamit din | |||||||
| kung hinihiling ng mga customer |
Ang pagmamarka ng cable at pagmamarka ng reel ng cable
Ang cable sheath ay dapat markahan ng mga puting character alinsunod sa kinakailangan ng customer.
Write your message here and send it to us
