GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
Color:
deskribapena
GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
GY—— Communication room (field) outdoor optical cable
X —— Cable center tube (covering) structure
T —— Filled structure
W —— Steel polyethylene bonded sheath with steel wire entrained (referred to as W sheath)
Kableen eraikuntzaren xehetasunak
| Zuntz kopurua | 1 ~ 24core | |||||||
| Hodi soltea | material | PBT | ||||||
| diametroa | Ф2.2 (kanpoko / barruko) | |||||||
| Tube-betetze | Hodiak betetzeko konposatua | |||||||
| Altzairuzko alanbrea | tamaina | 0.8mm | ||||||
| zenbakia | 2 | |||||||
| Kanpokoa | material | LH, PEAD, LDPE | ||||||
| diametroa | 1.8 ± 0.2mm | |||||||
Zuntz kolorea
| Zk | 1 | 2 | 3 | 4 | 5 | 6 |
| Kolore |  |
 |
 |
 |
 |
 |
| Zk | 7 | 8 | 9 | 10 | 11 | 12 |
| Kolore |  |
 |
 |
 |
 |
 |
| Zk | 13 | 14 | 15 | 16 | 17 | 18 |
| Kolore |  |
 |
 |
 |
 |
 |
| Zk | 19 | 20 | 21 | 22 | 23 | 24 |
| Kolore |  |
 |
 |
 |
 |
 |
Hodi kolorea
Kableen ezaugarri mekanikoa
| core | Kablearen diametroa | pisua | |||||
| 1 ~ 24 | 8.0mm + -0.3mm | 65kg / km + -10kg | |||||
| Tenperatura barruti | -40 + 70 | ----- | |||||
| Makurdura erradio min (mm) | Epe luzera | 10D | |||||
| Makurdura Radius(mm) |
Epe laburrera | 20D | |||||
| Min onargarri Tensile Strength(N) |
Epe luzera | 1200 | |||||
| Min onargarri Tensile Strength(N) |
Epe laburrera | 1500 | |||||
| Operazioa temperature （℃） |
-40 + 70 | ||||||
| Instalazio temperature（℃） |
-20 + 60 | ||||||
| Biltegiratze tenperatura （℃） |
-40 + 70 | ||||||
Zuntzen ezaugarria
| Zuntz estiloa | unitatea | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
| baldintza | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| attenuation | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0.36 / 0.23 | 0.34 / 0.22 | 3.0 / 1.0 | ---- | ---- | |||
| Dispresion | 1550nm | PS / (nm * km) | ---- | ≤18 | ---- | ---- | Dispresion |
| 1625nm | PS / (nm * km) | ---- | ≤22 | ---- | ---- | ||
| banda-zabalerak | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | banda-zabalerak |
| 1300nm | MHZ.KM | ---- | ---- | ≧ 800 | ≧ 500 | ||
| Zero dispertsioaren uhin-luzera | nm | 1300-1324 | ≧ 1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
| Zero dispertsio malda | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
| PMD gehienezko Fibr Bakarra | ≤0,2 | ≤0,2 | ---- | ---- | ≤0.11 | ||
| PMD Diseinuaren Estekaren balioa | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | ---- | ---- | ---- | |
| Zuntz mozteko uhin luzera λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
---- | ---- | ---- | |
| Kablearen sutoff wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
| MFD | 1310nm | um | 9.2 +/- 0,4 | 9.2 +/- 0,4 | ---- | ---- | ---- |
| 1550nm | um | 10.4 +/- 0,8 | 10.4 +/- 0,8 | ---- | ---- | ---- | |
| Zenbakizko Aperture(NA) |
---- | ---- | 0.200 + / -0.015 |
0,275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
| Urratsa (bideratze measurement) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Irregulartasunak zuntz length and point |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Dicontinuity | |||||||
| Diferentzia atzeraeraginaren coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Atenuazio uniformetasuna | dB / km | ≤0.01 | ≤0.01 | ||||
| Core dimater | um | 50 +/- 1,0 | 62,5 +/- 2,5 | 50 +/- 1,0 | |||
| Estalduraren diametroa | um | 125.0 +/- 0,1 | 125.0 +/- 0,1 | 125.0 +/- 0,1 | 125.0 +/- 0,1 | 125.0 +/- 0,1 | |
| Estaldurarik gabeko zirkulartasuna | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Estalduraren diametroa | um | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Estaldura / kafetxea concentrically error |
um | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Estaldura ez zirkularitatea | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Nukleoaren / estalduraren konentrikotasun errorea | um | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Curl (erradioak) | um | ≤4 | ≤4 | ---- | ---- | ---- | |
Package
| 1.Ezkartzeko materiala: zurezko danborra | |||||||
| 2. Enbalatzeko luzera: kablearen luzera estandarra 2 kmkoa izango da. Beste kableen luzera ere eskuragarri dago | |||||||
| bezeroek hala eskatzen badute |
Kableak eta kable bidezko bobina markatzea
Kablearen mahuka karaktere zuriekin markatuta egongo da bezeroaren eskakizunaren arabera.
Write your message here and send it to us
