GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
Color:
ʻO keʻano
GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
GY—— Communication room (field) outdoor optical cable
X —— Cable center tube (covering) structure
T —— Filled structure
W —— Steel polyethylene bonded sheath with steel wire entrained (referred to as W sheath)
Nā kaha kiko pūnaewele
| Ka helu o ka uea | 1 ~ 24core | |||||||
| Luku kūkeo | papa | PBT | ||||||
| ka lika | Ф2.2 (waho / loko) | |||||||
| Hoʻopiha hāpiha | Ka hoʻopihapiha hoʻopili piha i | |||||||
| Kūleʻa kila | ʻōpū | 0.8mm | ||||||
| Helu | 2 | |||||||
| ʻO ka wahī ʻokoʻa | papa | PE, HDPE, LDPE | ||||||
| anawaena | 1,8 ± 0.2mm | |||||||
Kāleka kolepa
| Aʻole. | 1 | 2 | 3 | 4 | 5 | 6 |
| Kāleka |  |
 |
 |
 |
 |
 |
| Aʻole. | 7 | 8 | 9 | 10 | 11 | 12 |
| Kāleka |  |
 |
 |
 |
 |
 |
| Aʻole. | 13 | 14 | 15 | 16 | 17 | 18 |
| Kāleka |  |
 |
 |
 |
 |
 |
| Aʻole. | 19 | 20 | 21 | 22 | 23 | 24 |
| Kāleka |  |
 |
 |
 |
 |
 |
Kāleʻa Tube
Pūnaewele Uila ʻenehana
| mea kumu | Ke kaula uila | kaumaha | |||||
| 1 ~ 24 | 8.0mm + -0.3mm | 65kg / km + -10kg | |||||
| Huhuoli | -40 + 70 | ----- | |||||
| Ke Kulanui Haoleau (mm) | Wā lōʻihi | 10D | |||||
| Ke Kulanui Radius(mm) |
ʻO ka pōkole | 20D | |||||
| Hōʻike Tensile Strength(N) |
Wā lōʻihi | 1200 | |||||
| Hōʻike Tensile Strength(N) |
ʻO ka pōkole | 1500 | |||||
| Ka lawelawe temperature （℃） |
-40 + 70 | ||||||
| Ke hoʻonohonoho ʻana temperature（℃） |
-20 + 60 | ||||||
| ʻOkoʻa ka ʻakaʻohana （℃） |
-40 + 70 | ||||||
Hōʻano piha
| ʻĀpana kapa | Mālama | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
| kūlana | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| kamaʻilio ʻana | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0.36 / 0.23 | 0.34 / 0.22 | 3,0 / 1.0 | ---- | ---- | |||
| Hōʻike | 1550nm | Ps / (nm * km) | ---- | ≤18 | ---- | ---- | Hōʻike |
| 1625nm | Ps / (nm * km) | ---- | ≤22 | ---- | ---- | ||
| Kākau | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | Kākau |
| 1300nm | MHZ.KM | ---- | ---- | ≧ 800 | ≧ 500 | ||
| ʻO Zero ka laha māmā | nm | 1300-1324 | ≧ 1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
| Zero hoʻōki luhi | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
| PMID Nui loa Fibrid | 0.2 | 0.2 | ---- | ---- | ≤0.11 | ||
| Ka Uila Hoʻohui PMD | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | ---- | ---- | ---- | |
| Fiber cutoff wavel e lōʻihi cutc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
---- | ---- | ---- | |
| Waihona wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
| MFD | 1310nm | um | 9.2 +/- 0.4 | 9.2 +/- 0.4 | ---- | ---- | ---- |
| 1550nm | um | 10.4 +/- 0.8 | 10.4 +/- 0.8 | ---- | ---- | ---- | |
| Mahalo Aperture(NA) |
---- | ---- | 0.200 + / -0.015 |
0.275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
| Hana (ʻo ke ʻano o ka ana ʻana o ka bidirectional measurement) |
obaa | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Nā kikoʻī ma luna o ke ana o ka fiber fiber length and point |
obaa | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| ʻĀpana | |||||||
| Koena unuhi backscatter coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Hoʻohui ka lole | dB / km | ≤0.01 | ≤0.01 | ||||
| Nā kikowaena kikoʻī | um | 50 +/- 1.0 | 62.5 +/- 2.5 | 50 +/- 1.0 | |||
| Ke aniani pale | um | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | 125.0 +/- 0.1 | |
| Ke kelepona ʻole paʻa | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Ke aniani pale | um | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Ka penaʻana / chaffinch concentrically error |
um | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Kaina haehae | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Hōʻeha ka lau / cladding conentricity | um | 0.6 | 0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Kukulu (radius) | um | ≤4 | ≤4 | ---- | ---- | ---- | |
Paʻi
| 1.Packing material: pahu lāʻau | |||||||
| 2.Packing lōʻihi: 2 mau lōʻihi ka lōʻihi o ke kelepona he 2 km. ʻOi aku hoʻi ka lōʻihi o ke kelepona | |||||||
| inā makemake e nā mea kūʻai aku |
ʻO ka māka hulina a me nā uila reel hōʻailona
E hōʻailona ʻia ka wahī kaula me nā hiʻohiʻona keʻokeʻo e like me ka koi o ka mea kūʻai aku.
Write your message here and send it to us
