GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
Color:
Katerangan
GYXTW (metal strengthening member, steel-polyethylene bonded sheath with steel wire entrained, central beam tube type full-filled outdoor optical cable for communication) The structure of the optical cable is to place the loose tube in the center of the cable, and the single-mode optical fiber is sheathed by the A loose tube made of high modulus plastic filled with waterproof compound. The loose tube is longitudinally wrapped with water-blocking tape and steel belt, and the two sides of the cable core are polyethylene sheathed with two parallel steel wires as reinforcements.
GY—— Communication room (field) outdoor optical cable
X —— Cable center tube (covering) structure
T —— Filled structure
W —— Steel polyethylene bonded sheath with steel wire entrained (referred to as W sheath)
Rincian konstruksi kabel
Jumlah serat | 1 ~ 24core | |||||||
Leungit pipah | matérial | PBT | ||||||
diameter | Ф2.2 (luar / jero) | |||||||
Tube-ngeusian | Témo anu ngeusian sanyawa | |||||||
Kawat waja | ukuran | 0,8mm | ||||||
Nomer | 2 | |||||||
Malang jero | matérial | Pe, HDPE, LDPE | ||||||
Diameter | 1,8 ± 0.2mm |
Warna Serat
Teu. | 1 | 2 | 3 | 4 | 5 | 6 |
Warna | ||||||
Teu. | 7 | 8 | 9 | 10 | 11 | 12 |
Warna | ||||||
Teu. | 13 | 14 | 15 | 16 | 17 | 18 |
Warna | ||||||
Teu. | 19 | 20 | 21 | 22 | 23 | 24 |
Warna |
Warna Tube
Listrik ciri mékanis
inti | Diaméter kabel | beurat | |||||
1 ~ 24 | 8.0mm + -0.3mm | 65kg / km + -10kg | |||||
Kisaran suhu | -40 + 70 | ----- | |||||
Min Bending Radius (mm) | Jangka panjang | 10D | |||||
Min Bending Radius(mm) |
Jangka pondok | 20D | |||||
Min ku Tensile Strength(N) |
Jangka panjang | 1200 | |||||
Min ku Tensile Strength(N) |
Jangka pondok | 1500 | |||||
Operasi temperature (℃) |
-40 + 70 | ||||||
Pamasangan temperature(℃) |
-20 + 60 | ||||||
Panyimpen temprature (℃) |
-40 + 70 |
Serat ciri
Gaya serat | Unit | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
kaayaan | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
atenuasi | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
0,36 / 0.23 | 0,34 / 0.22 | 3,0 / 1.0 | ---- | ---- | |||
Nyebatna | 1550nm | Ps / (nm * km) | ---- | ≤18 | ---- | ---- | Nyebatna |
1625nm | Ps / (nm * km) | ---- | ≤22 | ---- | ---- | ||
Bandwith | 850nm | MHZ.KM | ---- | ---- | ≧ 400 | ≧ 160 | Bandwith |
1300nm | MHZ.KM | ---- | ---- | 800 | ≧ 500 | ||
Gelombang penyebaran zero | nm | 1300-1324 | ≧ 1302, ≤1322 |
---- | ---- | ≧ 1295, ≤1320 |
|
Lamping Zero lamping | nm | ≤0.092 | ≤0.091 | ---- | ---- | ---- | |
Fibril Individu PMD Maksimum | ≤0.2 | ≤0.2 | ---- | ---- | ≤0.11 | ||
Nilai Patalina PMD Desain | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | ---- | ---- | ---- | |
Serat panjang gelombang cutoff λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
---- | ---- | ---- | |
Panjang wavelength λcc |
nm | ≤1260 | ≤1260 | ---- | ---- | ---- | |
MFD | 1310nm | Ehm | 9.2 +/- 0,4 | 9.2 +/- 0,4 | ---- | ---- | ---- |
1550nm | Ehm | 10,4 +/- 0,8 | 10,4 +/- 0,8 | ---- | ---- | ---- | |
Nomer Aperture(NA) |
---- | ---- | 0,200 + / -0.015 |
0,275 +/- 0. 015 |
0,200 +/- 0 .015 |
||
Léngkah (maksud measurement) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
Kaanggotaan tina serat length and point |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 |
Kasalahan | |||||||
Bédana tukang-tukang coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
Kaasaruaan Attenuasi | dB / km | ≤0.01 | ≤0.01 | ||||
Dimater inti | Ehm | 50 +/- 1.0 | 62.5 +/- 2,5 | 50 +/- 1.0 | |||
Diaméteran panyétok | Ehm | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | 125,0 +/- 0,1 | |
Panutupan non-sirkularitas | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
Diaméter palapis | Ehm | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
Palapis / chaffinch concentrically error |
Ehm | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
Palapis non circularity | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
Kasalahan konperénsi inti / cladding | Ehm | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
Keriting (radius) | Ehm | ≤4 | ≤4 | ---- | ---- | ---- |
Pakét
Bahan 1.Packing: Gendong kayu | |||||||
2.Packing panjang: panjang standar kabel kedah 2 km. Panjang kabel sanésna ogé sayogi | |||||||
upami diperlukeun ku nasabah |
Nyirian kabel sareng kabel reel
Sarung kabel kedah ditandaan ku karakter bodas nurutkeun sarat palanggan.
Write your message here and send it to us