GYTS is a kind of metal strengthening member, loose tube stranded filling type, steel-polyethylene bonded sheathed outdoor optical fiber cable for communication. The structure of the optical cable is made of single-mode or multi-mode optical fiber sheathed by high modulus plastic Fill the loose tube with waterproof compound. The center of the cable core is a metal reinforced core. For some fiber optic cables, the metal reinforced core is also extruded with a layer of polyethylene (PE). The loose tube (and filling rope) is twisted around the central reinforcing core to form a compact and circular cable core, and the gaps in the cable core are filled with water blocking compounds. The steel-plastic composite tape is longitudinally wrapped and then extruded with a polyethylene sheath.
Color:
Tlhaloso
GYTS is a kind of metal strengthening member, loose tube stranded filling type, steel-polyethylene bonded sheathed outdoor optical fiber cable for communication. The structure of the optical cable is made of single-mode or multi-mode optical fiber sheathed by high modulus plastic Fill the loose tube with waterproof compound. The center of the cable core is a metal reinforced core. For some fiber optic cables, the metal reinforced core is also extruded with a layer of polyethylene (PE). The loose tube (and filling rope) is twisted around the central reinforcing core to form a compact and circular cable core, and the gaps in the cable core are filled with water blocking compounds. The steel-plastic composite tape is longitudinally wrapped and then extruded with a polyethylene sheath.
Ho aha mehala
| Palo ea fiber | 2~144 F | |||||||
| Mongobo oa mongobo | Sistimi e thibelang metsi | |||||||
| Setho se matla sa bohareng | Lintho tse bonahalang | Mohala oa tšepe / FRP / FRP o koahelang sekoaelo sa PE | ||||||
| boholo | 1.5mm ~ 2.0mm | |||||||
| Bolo ea loose | thepa | PBT | ||||||
| Bophara ba | Ф2.2 (bokantle / kahare) | |||||||
| Ho tlatsa Tube | Tube e tlatsang | |||||||
| Lihlomo | Lintho tse bonahalang | Teipi ea tšepe e senyehileng | ||||||
| Sheath kantle | thepa | PE, HDPE | ||||||
| Bophara ba | 1.70 ± 0.2mm | |||||||
'Mala oa Feri
| Che. | 1 | 2 | 3 | 4 | 5 | 6 |
| Mmala |  |
 |
 |
 |
 |
 |
| Che. | 7 | 8 | 9 | 10 | 11 | 12 |
| Mmala |  |
 |
 |
 |
 |
 |
Mofuta oa Tube
| Che. | 1 | 2 | 3 | 4 | 5 | 6 |
| Mmala |  |
 |
 |
 |
 |
 |
| Che. | 7 | 8 | 9 | 10 | 11 | 12 |
| Mmala |  |
 |
 |
 |
 |
 |
Cable Mechanical tšobotsi
| mantlha | Cable bophara | boima | |||||
| Li-cores tse 2 ho isa ho 60 cores | 10.0 ± 0,3mm | 115 ± 5kg / km | |||||
| Li-cores tse 72 | 10.5 ± 0.3mm | 120 ± 5kg / km | |||||
| Li-cores tse 96 | 12.5 ± 0.3mm | 180 ± 5kg / km | |||||
| 144 cores | 14.5 ± 0.3mm | 245 ± 5kg / km | |||||
| Radius e Bonyane | Nako e telele | 10D | |||||
| Mets kobang Radius(mm) |
Nako e khutšoane | 20D | |||||
| Mets lumelleha Tensile Strength(N) |
Nako e telele | 600 | |||||
| Mets lumelleha Tensile Strength(N) |
Nako e khutšoane | 1500 | |||||
| Moroalo oa Crush (N / 100mm) | Nako e telele | 300 | |||||
| Moroalo oa Crush (N / 100mm) | nako e khutšoane | 1000 | |||||
| Ts'ebetso temperature （℃） |
-40 + 70 | ||||||
| Kenya temperature（℃） |
-20 + 60 | ||||||
Sebopeho sa fiber
| Mokhoa oa feshene | Setsi | SM G652 |
SM G652D |
MM 50/125 |
MM 62.5/125 |
MM OM3-300 |
|
| boemo | nm | 1310/1550 | 1310/1550 | 850/1300 | 850/1300 | 850/1300 | |
| tumello | dB / km | ≤ | ≤ | ≤ | ≤3.0 / 1.0 | ≤3.0 / 1.0 | |
| 0.36 / 0.23 | 0.34 / 0.22 | 3.0 / 1.0 | —- | —- | |||
| Ho qhalakana | 1550nm | Ps / (nm * km) | —- | ≤18 | —- | —- | Ho qhalakana |
| 1625nm | Ps / (nm * km) | —- | ≤22 | —- | —- | ||
| Bandwith | 850nm | MHZ.KM | —- | —- | ≧ 400 | ≧ 160 | Bandwith |
| 1300nm | MHZ.KM | —- | —- | ≧ 800 | ≧ 500 | ||
| Zero dispersion wavelength | nm | 1300-1324 | ≧ 1302, ≤1322 |
—- | —- | ≧ 1295, ≤1320 |
|
| Zero dispersion slope | nm | ≤0.092 | ≤0.091 | —- | —- | —- | |
| PMD Maximum Fitness ea Motho ka Mong | ≤0.2 | ≤0.2 | —- | —- | ≤0.11 | ||
| Boleng ba Design ea PMD | Ps (nm2 * k m) |
≤0.12 | ≤0.08 | —- | —- | —- | |
| Fiber cutoff wavelength λc | nm | ≧ 1180, ≤1330 |
≧ 1180, ≤1330 |
—- | —- | —- | |
| Cable cutoff wavelength λcc |
nm | ≤1260 | ≤1260 | —- | —- | —- | |
| MFD | 1310nm | mm | 9.2 +/- 0.4 | 9.2 +/- 0.4 | —- | —- | —- |
| 1550nm | mm | 10.4 +/- 0.8 | 10.4 +/- 0.8 | —- | —- | —- | |
| Lipalo tsa lipalo Aperture(NA) |
—- | —- | 0.200 + / -0.015 |
0.275 +/- 0. 015 |
0.200 +/- 0 .015 |
||
| Mohato (ho bolela measurement) |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Lintho tse sa tsamaeeng ho feta length and point |
dB | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.10 | ≤0.10 | |
| Boitlhotlhollo | |||||||
| Phapang backscatter coefficient |
dB / km | ≤0.05 | ≤0.03 | ≤0.08 | ≤0.10 | ≤0.08 | |
| Tekanyo ea tloaelo | dB / km | ≤0.01 | ≤0.01 | ||||
| Bophara ba "core" | mm | 50 +/- 1.0 | 62.5 +/- 2,5 | 50 +/- 1.0 | |||
| Bophara ba cladding | mm | 125.0 +/- 0,1 | 125.0 +/- 0,1 | 125.0 +/- 0,1 | 125.0 +/- 0,1 | 125.0 +/- 0,1 | |
| Ho roala metheo e sa potoloha | % | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | |
| Bophara ba koae | mm | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | 242 +/- 7 | |
| Li-coating / chaffinch concentrically error |
mm | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | ≤12.0 | |
| Ho kopitsa lintho tse sa potoloha | % | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 | |
| Phoso ea "core / cladding" e tebileng haholo | mm | ≤0.6 | ≤0.6 | ≤1.5 | ≤1.5 | ≤1.5 | |
| Curl (radius) | mm | ≤4 | ≤4 | —- | —- | —- | |
Package
| Sesebelisoa sa 1.Packing: Moqomo oa lehong | |||||||
| Bolelele ba 2.Packing: Bolelele bo tloaelehileng ba thapo e tla ba 2 km. Bolelele ba cable e boetse ea fumaneha | |||||||
| haeba e hlokoa ke moreki |
Ho tšoaea cable le ho tšoaea cable
Sheath ea cable e tla tšoauoa ka litlhaku tse tšoeu ho latela litlhoko tsa moreki.
Write your message here and send it to us
